Process Calibrators
Calibrators that measure and generate mA, voltage, temperature and other signals, for checking transmitters, controllers and process loops.
Products
-
Enquire about Kusam Meco KM-CAL-815
Kusam Meco KM-CAL-815 Loop Calibrator, Source and Measure
Loop calibrator: source 0 – 30 mA (±0.05%), measure ±30 V and ±30 mA (±0.02%), 24 V loop power, 0 – 20 / 4 – 20 mA, automatic step / ramp waveforms.
-
Enquire about Fluke 715
Fluke 715 Volt/mA Loop Calibrator
Compact volt/mA calibrator, 0.01% accuracy and 1 µA resolution; sources and measures mA loops and voltage.
-
Enquire about Lutron SC-941
Lutron SC-941 Sound Calibrator, 94 dB / 1 kHz
Sound calibrator giving 94 dB at 1000 Hz for 0.5 and 1 inch microphones, to IEC 942 class 2, for checking sound level meters in the field.
-
Enquire about Meco 333P+
Meco 333P+ Multifunction Process Calibrator
Handheld process calibrator: 0 – 30 V and mV, 0 – 25 mA / 4 – 20 mA, K / E / J / T / R / B / S / N thermocouples and PT100, 24 mA drive, for PLC and transmitter checks.
-
Enquire about Kusam Meco KM-CAL-904MK-1
Kusam Meco KM-CAL-904MK-1 Loop Calibrator, mA and V Source
Loop calibrator sourcing 0 – 24 mA (1 kΩ load, 24 V loop) and 0 – 24 V with 0.025% basic accuracy, auto ramp and step, 0 – 100% steps, open-loop alarm.
-
Enquire about Fluke 717 30G
Fluke 717 30G Pressure Calibrator, -12 to 30 psi
Pressure calibrator with internal sensor, -12 to 30 psi (-850 mbar to 2 bar), 0.05% FS; measures mA with 24 V loop power.
-
Enquire about Lutron SC-942
Lutron SC-942 Sound Calibrator, 94 dB and 114 dB
Sound calibrator with 94 dB and 114 dB outputs at 1000 Hz, for 0.5 and 1 inch sound level meter microphones.
-
Enquire about Meco VCG-09
Meco VCG-09 Voltage and Current Signal Generator, Pocket Size
Pocket voltage and current signal generator with LED display and rotary knob, powered by 9 – 30 V DC, micro-USB 5 V or optional Li-ion battery.
-
Enquire about Kusam Meco KM-CAL-905
Kusam Meco KM-CAL-905 Multifunction Process Calibrator with Pressure
Multifunction process calibrator, ±0.02%, sources and measures V, mA, Ω, frequency, thermocouples and RTDs at the same time, 24 V loop, pressure with optional modules, dual 5-digit backlit display.
-
Enquire about Fluke 724
Fluke 724 Temperature Calibrator
Temperature calibrator that sources and measures 10 thermocouple and 7 RTD types, volts and ohms, and measures 4-20 mA loops.
-
Enquire about Lutron SC-943
Lutron SC-943 Sound Calibrator, 94 dB / 125 Hz
Sound calibrator giving 94 dB at 125 Hz for 0.5 and 1 inch microphones, with a low battery indicator.
-
Enquire about Kusam Meco KM-CAL-905A
Kusam Meco KM-CAL-905A Multifunction Process Calibrator
Multifunction process calibrator, ±0.02%, sources and measures V, mA, Ω, frequency, thermocouples and RTDs at the same time, 24 V loop (no pressure function), dual 5-digit backlit display.
-
Enquire about Fluke 725
Fluke 725 Multifunction Process Calibrator
Multifunction process calibrator: mA, volts, temperature (RTD and TC), frequency, ohms and pressure; 24 V loop power.
-
Enquire about Lutron TC-424
Lutron TC-424 Thermometer Calibrator, Source and Measure
Process calibrator that sources and measures thermocouple (K/J/R/E/T/S), Pt-100, mV and ohm signals, for checking temperature instruments.
-
Enquire about Kusam Meco KM-CAL-906
Kusam Meco KM-CAL-906 Temperature Calibrator, Source and Measure (mV, Ω, TC, RTD)
Temperature calibrator with ±0.02% accuracy: measures and sources mV, Ω, 10 thermocouple types and Pt / Cu RTDs, dual backlit display (5 digits measure, 6 digits source).
-
Enquire about Fluke 726
Fluke 726 Precision Multifunction Process Calibrator
Precision multifunction calibrator for temperature, frequency, voltage and mA; stores eight calibration results; 24 V loop power.
-
Enquire about Lutron TC-920
Lutron TC-920 Type K Thermometer and Thermocouple Calibrator
Two-in-one type K thermometer and type K thermocouple simulator from -199 to 1230 °C, for calibrating thermometers and process devices.
-
Enquire about Kusam Meco KM-CAL-907
Kusam Meco KM-CAL-907 V / mA Process Calibrator, Source and Measure
V / mA process calibrator with ±0.02% accuracy: sources V, mA, frequency and pulses, measures V, mA and frequency, 24 V loop power, optional pressure function.
-
Enquire about Fluke 771
Fluke 771 Milliamp Process Clamp Meter
mA clamp meter for 4-20 mA signals without breaking the loop: 0.2% accuracy, 0.01 mA resolution, detachable clamp.
-
Enquire about Kusam Meco KM 071
Kusam Meco KM 071 4-20 mA DC Process Clamp Meter
Process clamp meter that measures 4-20 mA loop current without breaking the circuit: 0.01 mA – ±40 mA DC, % of span readout, 5 mm jaw, backlight and spotlight.
-
Enquire about Fluke 772
Fluke 772 Milliamp Process Clamp Loop Meter
mA clamp loop meter that measures, sources and simulates 4-20 mA signals; 0.2% accuracy, 0.01 mA resolution.
-
Enquire about Kusam Meco KM 26
Kusam Meco KM 26 Multifunction Process Calibrator
Field multifunction process calibrator, 0.01% basic accuracy, isolated measure and source channels, TC / RTD / V / mA / Ω / Hz / pulse, pressure modules, 1200-group memory, 3.2" TFT.
-
Enquire about Fluke 773
Fluke 773 Milliamp Process Clamp Meter with Voltage
mA clamp meter that measures, sources and simulates 4-20 mA, provides loop power and sources/measures DC voltage.
-
Enquire about Kusam Meco KM 26H
Kusam Meco KM 26H Multifunction Process Calibrator with HART
Field multifunction process calibrator, 0.01% basic accuracy, isolated measure and source channels, TC / RTD / V / mA / Ω / Hz / pulse, pressure modules, 1200-group memory, 3.2" TFT; built-in 250 Ω HART resistor and loop power.
