Kusam Meco KM 26H Multifunction Process Calibrator with HART
- Brand
- Kusam Meco
- Model number
- KM 26H
- Category
- Process Calibrators
Field multifunction process calibrator, 0.01% basic accuracy, isolated measure and source channels, TC / RTD / V / mA / Ω / Hz / pulse, pressure modules, 1200-group memory, 3.2" TFT; built-in 250 Ω HART resistor and loop power.
Price and availability on request
Downloads
- Datasheet: Kusam Meco KM 26H PDF, 103 KB
Key features
- Measurement and output in two separately isolated channels
- 2-, 3- and 4-wire resistance and RTD measurement
- Data hold, zero, ratio, average, max / min
- Internal 24 V loop power and loop current measurement
- Pressure measurement and pressure leak test with modules
- Ramp signal output
- Charging function
- HART communication without an external load resistor or power supply
Specifications
| DC millivolt | −10.000 – 110.000 mV |
|---|---|
| DC voltage | −0.10000 – 11.0000 V |
| DC current | 0.000 – 33.000 mA |
| Resistance | 0.00 – 4.0000 kΩ |
| Thermocouples | R / S / K / E / J / T / B / N / L / U |
| RTDs | PT100 / 200 / 500 / 1000, CU10 / CU50 |
| Frequency | 1 Hz – 50 kHz; 60 – 1200 CPM |
| Switch | 1 Hz – 50 kHz |
| Pulse | 1 – 100000 cycles |
| Pressure | Depends on the pressure module |
| DC millivolt | −5 – 550 mV |
|---|---|
| DC voltage | −0.5 – 35 V |
| DC current | −5 – 55 mA |
| Resistance | 0 – 5.5 kΩ |
| Thermocouples | R / S / K / E / J / T / B / N / L / U |
| RTDs | PT100 / 200 / 500 / 1000, CU10 / CU50 |
| Frequency | 3 Hz – 50 kHz; 180 – 3000000 CPM |
| Switch | Close / open |
| Continuity beeper | 0 – 500 Ω |
| Pulse | 1 – 100000 cycles |
| Pressure | Depends on the pressure module (module accuracy up to 0.05%) |
| Maximum accuracy | 0.01% |
|---|---|
| Loop power | 24 V |
| HART | Internal 250 Ω HART loop resistance and loop power |
| Display | 3.2" TFT, 5 digits, backlit |
| Memory | 1200 groups of field calibration data |
| Communication | RS232; remote control by driver software |
| Power supply | 4 × 1.5 V AA alkaline batteries |
| Dimensions | Approx. 206 (L) × 97 (W) × 60 (H) mm |
| Weight | Approx. 350 g |
| Accessories | User manual, carrying case and software CD |
| Standards | IEC 61010-1:2000; EMC EN 61326-1:2006 |
|---|
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Kusam Meco KM 26
Kusam Meco KM 26 Multifunction Process Calibrator
Field multifunction process calibrator, 0.01% basic accuracy, isolated measure and source channels, TC / RTD / V / mA / Ω / Hz / pulse, pressure modules, 1200-group memory, 3.2" TFT.
-
Enquire about Kusam Meco KM-CAL-802
Kusam Meco KM-CAL-802 Thermocouple Calibrator, Source and Measure
Thermocouple calibrator that sources and measures mV and R, S, B, E, K, J, T, N thermocouples with ±0.05% basic accuracy and reference junction compensation, °C / °F.
-
Enquire about Kusam Meco KM-CAL-803
Kusam Meco KM-CAL-803 RTD Calibrator, Source and Measure
RTD and resistance calibrator, source 0.1 – 4000 Ω and measure 0.1 – 5000 Ω, Pt100 / Pt200 / Pt500 / Pt1000 / Cu50, ±0.05% basic accuracy, 4-digit LCD.
-
Enquire about Kusam Meco KM-CAL-811
Kusam Meco KM-CAL-811 Temperature Calibrator, Source (mV, Ω, TC, RTD)
Temperature source calibrator, ±0.05%: 100 mV / 1 V, 400 Ω / 4 kΩ, R / S / K / E / J / T / N / B / A / C / D thermocouples and Pt100 – Pt1000 / Cu50 RTDs, cold junction compensation, backlit 5-digit display.
