Insulation Resistance Testers

Insulation testers (meggers) for cables, motors, transformers and switchgear. Choose by the test voltage you need, and analog, digital or hand-driven.

Kusam Meco KM 5305IN 5 kV High Performance Insulation Resistance Tester

Menu-driven 5 kV insulation tester with colour touch screen: test voltages 250 V to 5 kV, up to 10 TΩ, PI, DAR, ramp and filtered test modes, 1000-group memory with USB upload, lithium battery; IP65 closed, CAT IV 600 V, short-circuit current ≥7 mA.

Enquire about Kusam Meco KM 5305IN
CIE CIE/444 1000V 200MΩ Insulation Tester 1000 V, 200 MΩ, Hand Driven, Metal Body

CIE/444 hand-cranked insulation tester (megger) testing at 1000 V, scaled 0 to 200 MΩ, in a metal body. Constant-voltage governor, cross-coil movement, mirror scale; IS 2992:1987.

Enquire about CIE CIE/444 1000V 200MΩ
Waco WI 108 Analogue Insulation Tester 100 V, 500 MΩ, Hand Driven, Metal Body

Hand-cranked analogue insulation tester (megger) from Waco, testing at 100 V with a range up to 500 MΩ, in a metal body: for checking cables, motors, panels and switchgear without mains power.

Enquire about Waco WI 108
Meco DIT 945PI 2.5 kV / 200 GΩ Digital Insulation Tester with PI, DAR, Low Ohms and AC Voltage

2.5 kV, 200 GΩ digital insulation tester with PI, DAR, low resistance to 60 Ω and 600 V AC; battery or 12 V DC, rubber holster, CAT III 600 V.

Enquire about Meco DIT 945PI
Kyoritsu KEW 3132A Analogue Insulation and Continuity Tester, IP54

Analogue insulation and continuity tester built to IEC 61557 and IP54, with 1 mA insulation and 200 mA continuity test currents, auto discharge and a live-circuit warning.

Enquire about Kyoritsu KEW 3132A
Metrel MI 3125 BT EurotestCOMBO Multifunction Installation Tester, Bluetooth

Compact multifunction tester for TT and TN installations: insulation to 1000 V, 200 mA and 7 mA continuity, line / loop impedance with trip-lock, RCD, phase sequence and 3-wire earth; PASS / FAIL LEDs, Bluetooth.

Enquire about Metrel MI 3125 BT
Hioki SM7120 Super Megohm Meter

Single-channel super megohm meter for very high resistance: up to 2000 V output, 2 × 10^19 Ω maximum display, 0.1 fA minimum resolution and 300 times better noise resistance.

Enquire about Hioki SM7120
Kusam Meco KM 5310IN 10 kV High Performance Insulation Resistance Tester

Menu-driven 10 kV insulation tester with colour touch screen: test voltages 250 V to 10 kV, up to 20 TΩ, PI, DAR, ramp and filtered test modes, 1000-group memory with USB upload, lithium battery; IP65 closed, CAT IV 600 V, short-circuit current ≥7 mA.

Enquire about Kusam Meco KM 5310IN
CIE CIE/444 1000V 500MΩ Insulation Tester 1000 V, 500 MΩ, Hand Driven, Metal Body

CIE/444 hand-cranked insulation tester (megger) testing at 1000 V, scaled 0 to 500 MΩ, in a metal body. Constant-voltage governor, cross-coil movement, mirror scale; IS 2992:1987.

Enquire about CIE CIE/444 1000V 500MΩ
Waco WI 251 Analogue Insulation Tester 250 V, 20 MΩ, Hand Driven, Metal Body

Hand-cranked analogue insulation tester (megger) from Waco, testing at 250 V with a range up to 20 MΩ, in a metal body: for checking cables, motors, panels and switchgear without mains power.

Enquire about Waco WI 251
Meco DIT 954 5 kV / 200 GΩ Digital Insulation Tester with AC Voltage and Phase Sequence

5 kV, 200 GΩ digital insulation tester with 600 V AC measurement, phase sequence and phase status indication; battery or AC adaptor, IP 44.

Enquire about Meco DIT 954
Kyoritsu KEW 3161A Analogue Insulation and Continuity Tester, Miniature

Miniature analogue insulation and continuity tester weighing only 340 g with batteries, with auto discharge, a remote-switch test lead, backlight and a neck strap.

Enquire about Kyoritsu KEW 3161A
Metrel MI 3132 EV Tester for Electric Vehicles

Electric vehicle safety tester: insulation per UN ECE R100 and ISO 6469-3 in Ω/V using the vehicle battery, 2 A µΩ meter for equipotential bonding, continuity, insulation to 2.99 GΩ, AC / DC voltage; Li-ion, touch screen.

Enquire about Metrel MI 3132
Hioki SM7420 Super Megohm Meter

Four-channel super megohm meter for mass production on automated machines: rated at 6000 ps/minute, channel-independent low-capacity contact check, 300 times better noise resistance.

Enquire about Hioki SM7420
Kusam Meco KM 5315IN 15 kV High Performance Insulation Resistance Tester

Menu-driven 15 kV insulation tester with colour touch screen: test voltages 250 V to 15 kV, up to 30 TΩ, PI, DAR, ramp and filtered test modes, 1000-group memory with USB upload, lithium battery; IP65 closed, CAT IV 600 V, short-circuit current ≥7 mA.

Enquire about Kusam Meco KM 5315IN
CIE CIE/444 1000V 1000MΩ Insulation Tester 1000 V, 1,000 MΩ, Hand Driven, Metal Body

CIE/444 hand-cranked insulation tester (megger) testing at 1000 V, scaled 0 to 1000 MΩ, in a metal body. Constant-voltage governor, cross-coil movement, mirror scale; IS 2992:1987.

Enquire about CIE CIE/444 1000V 1000MΩ
Waco WI 252 Analogue Insulation Tester 250 V, 50 MΩ, Hand Driven, Metal Body

Hand-cranked analogue insulation tester (megger) from Waco, testing at 250 V with a range up to 50 MΩ, in a metal body: for checking cables, motors, panels and switchgear without mains power.

Enquire about Waco WI 252
Meco DIT 954-6R 6-Range 5 kV / 200 GΩ Digital Insulation Tester

5 kV, 200 GΩ digital insulation tester with 6 test voltages (100, 250, 500, 1000, 2500, 5000 V DC), backlit LCD, battery or AC adaptor.

Enquire about Meco DIT 954-6R
Kyoritsu KEW 3165 Analogue Insulation Tester 500V

Analogue insulation tester for 500 V / 1000 MΩ with an expanded megohm scale, an AC voltmeter scale and a neck strap so both hands stay free.

Enquire about Kyoritsu KEW 3165
Metrel MI 3136 EurotestCOMBO XC Multifunction Installation Tester

MI 3136 touch-screen installation tester for domestic and small-office TT and TN systems: continuity (8.5 mA / 200 mA), insulation to 1000 V, line / loop impedance, RCD, voltage and 3-wire earth; Li-ion battery, Bluetooth and USB-C.

Enquire about Metrel MI 3136
Hioki SM7810 Super MΩ HiTester

Eight-channel tester for MLCC leakage current: 6.8 ms per test on 8 channels at once, 1 pA to 1 mA ranges, 0.1 to 1000 V test voltage; made to order. 100/110 V AC power supply.

Enquire about Hioki SM7810
Kusam Meco KM 5405 5 kV Digital Insulation Resistance Tester (Megohmmeter)

5 kV digital megohmmeter: test voltages 100 V to 5 kV, insulation resistance up to 10 TΩ, PI and DAR, voltage, current and capacitance tests, 500-group memory, PC interface; IP54, CAT III 300 V, short-circuit current ≥6 mA.

Enquire about Kusam Meco KM 5405
CIE CIE/444 1000V 2000MΩ Insulation Tester 1000 V, 2,000 MΩ, Hand Driven, Metal Body

CIE/444 hand-cranked insulation tester (megger) testing at 1000 V, scaled 0 to 2000 MΩ, in a metal body. Constant-voltage governor, cross-coil movement, mirror scale; IS 2992:1987.

Enquire about CIE CIE/444 1000V 2000MΩ
Waco WI 253 Analogue Insulation Tester 250 V, 100 MΩ, Hand Driven, Metal Body

Hand-cranked analogue insulation tester (megger) from Waco, testing at 250 V with a range up to 100 MΩ, in a metal body: for checking cables, motors, panels and switchgear without mains power.

Enquire about Waco WI 253