Skip to content

Automation, Drives & PLC

Drives, controllers, panel meters, relays and accessories for control panels and machines. Choose a category, or send us your panel requirement and we will suggest suitable models.

All products in Automation, Drives & PLC

Masibus 5002U-P ON/OFF and Proportional Controller

Masibus 5002U-P ON/OFF and proportional controller: input Ranges, output ON/OFF or proportional. For heat treatment furnaces, reheat furnaces.

Enquire about Masibus 5002U-P
Proton ACC-02-06 (1P) 3AC Aircon 3 AC Controller

Controller for automatic duty sharing and changeover of air conditioners (Proton ACC-02-06 (1P) 3AC).

Enquire about Proton ACC-02-06 (1P) 3AC
Lutron FC-422D Panel Frequency Meter, 0.5 to 500 Hz

DIN 96 x 48 mm panel frequency meter for 0.5 to 500.0 Hz from 5 to 250 V AC inputs, with a bright red LED display.

Enquire about Lutron FC-422D
JiGO Solenoid Coil

Jigo solenoid coil, for control panels and automation. Available in 9 versions; see the table below.

Enquire about JiGO
Cautoni D200-2-7R5-00-C D200 Series VFD, 7.5 kW, Single Phase 220V Input

Cautoni D200 variable frequency drive for single phase 220 V, 50 Hz supply: 7.5 kW motor in heavy duty, 11 kW in light duty. V/F and vector control, RS-485, built-in PID, IP20 ABS case.

Enquire about Cautoni D200-2-7R5-00-C
Kusam Meco DML Dual Display Flow Digital Meter

Flow meter with dual display: 5-digit flow rate and 7-digit totaliser from a 4 – 20 mA or 0 – 20 mA input, linear or square-root, pulse, analog or RS-485 output, 10-year totaliser memory.

Enquire about Kusam Meco DML
Autonics AT8N-1 W 48 × H 48 mm Analog Timer AT8N-1

Autonics AT8N-1 W 48 × H 48 mm analog timer (ATN Series): Relay output, 100 - 240 VAC 50 / 60 Hz, 24 - 240 VDC supply. Order code note: 12VDC.

Enquire about Autonics AT8N-1
Selec 600DT Multifunction Digital Timer 600DT

Selec 600DT multifunction digital timer: output 1 C/O SPDT, 20 to 240V AC / DC supply, 17.5mm, DIN rail mount.

Enquire about Selec 600DT
Delta ASDA-A+ High Power AC Servo Drive and Motor

Servo system for 4.5 to 7.5 kW with 3 to 7.5 kW medium / high inertia motors, 20-bit encoder, 550 Hz response and 4 Mbps pulse input. Discontinued; replaced by the A3 Series.

Enquire about Delta ASDA-A+
Rishabh 252-PDO DC Over Voltage Relay

DC over voltage relay for battery supplies and chargers: externally adjustable time delay (0-10, 0-20 or 0-30 s), 1% preset differential; DPDT contacts, auto reset.

Enquire about Rishabh 252-PDO
Unison UNI 101 ZDA 60 40 01 AL5 Solid State Relay 101, DC to AC Zero Cross, 40 A

45 mm hockey-puck solid state relay (101 series) with zero-cross switching for 40 A AC loads at 24-480 V AC, driven by a 4-32 V DC control signal. Mounts on a panel or, with a heat sink, on DIN rail.

Enquire about Unison UNI 101 ZDA 60 40 01 AL5
Veritek CBCT 210 Moulded Core Balance Current Transformer, 210 mm

Moulded core balance CT, 210 mm inner diameter, sensing 30 mA to 30 A, for earth leakage (ELR) and earth fault (EFR) relays.

Enquire about Veritek CBCT 210
Multispan AVF-133 AVF Meter, 3 + 3 Line Display

Volt-amp-frequency meter for 3-phase or single-phase systems with a 6-line (3 + 3) LED display for 50-520 V AC line voltage. Optional RS-485 Modbus.

Enquire about Multispan AVF-133
Meco CR60 Rectangular AC Panel Meter, Clear Acrylic

Clear acrylic rectangular AC panel meter, moving coil with rectifier, ±2.5% of full scale; 1 A or 5 A (with CT box) and 10 – 1000 V ranges.

Enquire about Meco CR60
Adi-Artech 20410 Crane Load Cell

Adi-Artech strain gauge crane load cell, 3 Tf to 300 Tf for tension loads, in nickel-plated tool steel, IP65 sealed. For force measurement tension dynamometer, hanging & crane scale, cargo handling in ship yards.

Enquire about Adi-Artech 20410
Minilec D1 IST1 Loop Powered DC Signal Isolator

Minilec D1 IST1 loop powered DC signal isolator with 4-20mA DC output. Typical uses: instrumentation panels, measurement & control panels, control desk.

Enquire about Minilec D1 IST1
EAPL A1DE-X Interval Timer, 0.3 s to 30 min

EAPL A1DE-X interval timer from the A series, 0.3 s to 30 min, 2 C/O, for universal 'X' voltage supply.

Enquire about EAPL A1DE-X
Masibus 5006RN / LC5296H ON/OFF Controller

Masibus 5006RN / LC5296H ON/OFF controller: input Input Type / Range. For heat treatment furnaces, water heating boilers.

Enquire about Masibus 5006RN / LC5296H
Proton ACC-02-06 (1P) 4AC Aircon 4 AC Controller

Controller for automatic duty sharing and changeover of air conditioners (Proton ACC-02-06 (1P) 4AC). Runs on 230 V AC.

Enquire about Proton ACC-02-06 (1P) 4AC
Lutron IOW-924 I/O Controller to WiFi Converter

Converter that sends two switch inputs, a Lutron meter RS232 signal and two relay outputs over WiFi or Ethernet, with Android and iOS apps.

Enquire about Lutron IOW-924
JiGO PID Series

Jigo PID series, for heating and process temperature control.

Enquire about JiGO
Cautoni D200-3-0R7-00-C D200 Series VFD, 0.75 kW, Three Phase 380V Input

Cautoni D200 variable frequency drive for three phase 380 V, 50 Hz supply: 0.75 kW motor in heavy duty, 1.5 kW in light duty. V/F and vector control, RS-485, built-in PID, IP20 ABS case.

Enquire about Cautoni D200-3-0R7-00-C
Kusam Meco DMP Potentiometer / Level / Position Setting Digital Meter

4½ / 5-digit meter for potentiometer, level and position sensors (2-wire 0 – X Ω or 3-wire 200 Ω – 10 kΩ), 0.1% FS + 1 count, 2 alarm relays, analog or RS-485 output.

Enquire about Kusam Meco DMP
Autonics AT8N-2 W 48 × H 48 mm Analog Timer AT8N-2

Autonics AT8N-2 W 48 × H 48 mm analog timer (ATN Series): Relay output, 100 - 240 VAC 50 / 60 Hz, 24 - 240 VDC supply. Order code note: 24VAC/24VDC.

Enquire about Autonics AT8N-2

Show more products