Automation, Drives & PLC
Drives, controllers, panel meters, relays and accessories for control panels and machines. Choose a category, or send us your panel requirement and we will suggest suitable models.
All products in Automation, Drives & PLC
-
Enquire about Delta DTB
Delta DTB Standard Temperature Controller
Controller with PID, on-off and programmable control, thermocouple, RTD, current and voltage inputs, heating and cooling dual output, three alarm groups and RS-485, in 4824 to 9696 panel sizes.
-
Enquire about Rishabh 256-PRC
Rishabh 256-PRC Hot Spot 3 RTD Temperature Relay, 1 Setpoint
Temperature trip relay for up to three RTD zones (motor or transformer windings): picks the highest reading, gives a 1 mA output and 1 adjustable setpoint with SPDT relay.
-
Enquire about Unison UNI 803 ZDA 58 150 01
Unison UNI 803 ZDA 58 150 01 Solid State Relay 803, Slim, DC to AC Zero Cross, 150 A
Slim zero-cross solid state relay (803 series) for 150 A AC loads at 24-580 V AC, driven by a 4-32 V DC control signal. Mounts on DIN rail with a matching heat sink.
-
Enquire about Veritek VIPS 83P1
Veritek VIPS 83P1 Single-Phase VAF Multifunction Meter, 3 Digits
Single-phase VAF multifunction meter with 3-digit LED display: voltage, current, PF, kW, kVA, frequency, run hours and RPM.
-
Enquire about Multispan MDT-17U
Multispan MDT-17U Multifunction Timer, Knob Setting
Slim 17.5 mm DIN-rail multifunction timer with mode, time range and trip delay set by knobs, one changeover relay and universal 12-240 V DC / 20-240 V AC supply.
-
Enquire about Meco FDM1444SAD
Meco FDM1444SAD Double Frequency Meter
Double digital panel frequency meter: two independent red LED displays in one case, 9999 counts each, microcontroller interval measurement.
-
Enquire about Adi-Artech 90610-M
Adi-Artech 90610-M Low Profile Pancake Load Cell - Mini Button
Adi-Artech strain gauge low profile pancake load cell - mini button, 0-50 Kgf to 0-500 Kgf for compression loads, in SS 17-4 PH stainless steel, IP65 sealed. For brake force measurement, compressive force measurement & testing, pedal force monitor.
-
Enquire about Minilec F3 VSR4
Minilec F3 VSR4 Phase Failure Relay
Minilec F3 VSR4 phase failure relay with 2 CO output. Typical uses: inverter, UPS, auto mains failure panels.
-
Enquire about EAPL M3-24
EAPL M3-24 Programmable Alarm Annunciator, 24 Windows
Modular EAPL alarm annunciator with 24 bright LED fault windows, a built-in buzzer and alarm relay, and RS485 communication. The reset sequence (manual, auto, ring-back or FIFO) is selected on site.
-
Enquire about Masibus mUSB232 / mUSB485
Masibus mUSB232 / mUSB485 USB to RS232 / RS485 Converter
Masibus mUSB232 / mUSB485 USB to RS232 / RS485 converter. For media converter, data acquisition system.
-
Enquire about Proton VFR-1P
Proton VFR-1P Single Phase Voltage Frequency Relay, DIN Rail
Relay that watches supply voltage and frequency and trips the load on a fault (Proton VFR-1P). Runs on 230 V AC 1-phase, relay output rated 5 A at 250 V, DIN rail mounting.
-
Enquire about Kusam Meco TSAR
Kusam Meco TSAR AC Current Transducer, 1-phase, true RMS
Isolated 1-phase AC current transducer (true RMS conversion), 0 – 1 / 5 / 10 A AC input, 4 – 20 mA, 0 – 20 mA, 0 – 10 mA or 0 – 5 / 1 – 5 / 0 – 10 V DC output. Class 0.5%.
-
Enquire about Autonics ATS8-41
Autonics ATS8-41 W 38 × H 42 mm Analog Timer ATS8-41
Autonics ATS8-41 W 38 × H 42 mm analog timer (ATS Series): Relay output, 12 VDC supply. Order code note: 100-240VAC/24-240VDC.
-
Enquire about Selec ACH-001
Selec ACH-001 Serial Cable, 9 Pin D-Type ACH-001
Selec 1 m Modbus serial cable with 9-pin D-type connectors at both ends, male at one end and female at the other.
-
Enquire about Delta DTC
Delta DTC Modular Expansion Temperature Controller
Modular DIN-rail controller with PID, on-off and programmable control, inputs for thermocouple, RTD, 4-20 mA and 0-10 V, two alarm groups with 12 modes, RS-485 Modbus and 3-level password.
-
Enquire about Rishabh AN 011
Rishabh AN 011 Analog Panel Meter, ANSI Case (Anush Series)
Anush series ANSI case analog meter for AC/DC amps, volts or frequency with detachable lower fascia for surface or window mounting; 1.5% accuracy, true RMS moving iron types.
-
Enquire about Unison UNI 803 ZDA 58 200 01
Unison UNI 803 ZDA 58 200 01 Solid State Relay 803, Slim, DC to AC Zero Cross, 200 A
Slim zero-cross solid state relay (803 series) for 200 A AC loads at 24-580 V AC, driven by a 4-32 V DC control signal. Mounts on DIN rail with a matching heat sink.
-
Enquire about Veritek VIPS 84
Veritek VIPS 84 Energy Meter, LED
Three-phase energy meter with 8-digit LED kWh display, class 0.5 active energy, V, A, PF, power, frequency and THD; RS485 on the VIPS 84P.
-
Enquire about Multispan MDT-17X
Multispan MDT-17X Multifunction Timer with NFC Setting
DIN-rail multifunction timer from 0.1 to 999 hours with one changeover relay and multifunction modes, set up by NFC.
-
Enquire about Meco FDM1444SB
Meco FDM1444SB 4-Digit Digital Frequency Meter
4-digit (9999 count) digital panel frequency meter with red LED display, microcontroller interval measurement, DIN 43700 ABS case.
-
Enquire about Adi-Artech 90610-M-T
Adi-Artech 90610-M-T Low Profile Pancake Load Cell - Threaded Mounting
Adi-Artech strain gauge low profile pancake load cell - threaded mounting, 0 - 50 Kgf to 0 - 1000 Kgf for compression loads, in SS 17-4 PH stainless steel, IP67 sealed. For brake force measurement, pedal force monitor, machine automation.
-
Enquire about Minilec FRK P5
Minilec FRK P5 Level Switch for Diesel / Oil
Minilec FRK P5 level switch for diesel / oil, for 10-28 V DC ±10% supply. Typical uses: hydraulic machine manufacturers, generator panel manufacturers, users of day tanks for diesel fuel, lube oils, kerosene oil etc.
-
Enquire about EAPL M3-32
EAPL M3-32 Programmable Alarm Annunciator, 32 Windows
Modular EAPL alarm annunciator with 32 bright LED fault windows, a built-in buzzer and alarm relay, and RS485 communication. The reset sequence (manual, auto, ring-back or FIFO) is selected on site.
-
Enquire about Masibus NTS20
Masibus NTS20 Network Time Server
Masibus NTS20 network time server: output Description / Connector / Accuracy.