Omron
118 Omron products listed. For prices and availability, send an enquiry.
Omron and its logo are trademarks of their owner, shown here to identify the products. Trademarks & disclaimer
Products
-
E2F Resin-case Cylindrical Proximity Sensor
Cylindrical proximity sensor in a resin case with IP68 protection and good water resistance. Models with different frequencies prevent mutual interference.
-
E2K-X Cylindrical Capacitive Proximity Sensor, M12 / M18 / M30
General-purpose threaded capacitive proximity sensor in M12, M18 and M30 sizes with a fixed sensing distance, so no sensitivity adjustment is needed.
-
E2NC Smart Proximity Sensor with Separate Amplifier
Smart proximity sensor with a separate amplifier, teaching function and a digital display of excess gain. Many sensor heads and flexible cables between head and amplifier.
-
E2Q6 Rectangular Proximity Sensor, Adjustable Direction
Rectangular proximity sensor whose sensing direction can be changed: front, or 90 degrees up, down, left or right. Four indicators show status from several angles.
-
E3AS Distance-settable Photoelectric Sensors, HL / F / L
Distance-settable reflective photoelectric sensors in three types: E3AS-HL (CMOS laser), E3AS-F (time-of-flight, stainless steel case) and E3AS-L (high-power LED).
-
E3FA Photoelectric Sensors, M18 Series (E3FA, E3RA, E3FB, E3RB)
Cylindrical photoelectric sensor series that is quick to mount and set up, with a bright red LED, a large adjuster and indicators visible from a distance. Through-beam, retro-reflective and diffuse models.
-
E3NC Smart Laser Sensors with Separate Amplifier
Laser sensors with separate amplifier for jobs that fibre or standard photoelectric sensors cannot handle: transparent film, glossy metal and precise position. E3NC-L and E3NC-S heads.
-
E3NX-FA Smart Fiber Amplifier Unit
Fiber amplifier unit with a very wide light-intensity adjustment range and one-button Smart Tuning for stable detection from transparent objects to black workpieces.
-
E3Z Compact Photoelectric Sensor, Built-in Amplifier
Standard compact photoelectric sensor with built-in amplifier. Through-beam up to 30 m, retro-reflective 4 m and diffuse-reflective 1 m. NPN or PNP, pre-wired or M8 connector.
-
E3ZR-C Oil-resistant Photoelectric Sensors
Photoelectric sensors for machine tool areas where cutting oil causes failures. Fluororesin cable sheath and laser-welded seals keep the oil out.
-
E5AC Digital Temperature Controller, 96 x 96 mm
96 x 96 mm digital temperature controller with a large white PV display and a body only 60 mm deep. Push-In Plus removable terminal block and horizontal connection of up to 16 units.
-
E5AN-H / E5EN-H Advanced Digital Temperature Controller, 96 x 96 / 48 x 96 mm
Advanced digital temperature controller in 96 x 96 mm (E5AN-H) and 48 x 96 mm (E5EN-H) sizes, with a 5-digit display, 60 ms sampling and logic operations on the contact outputs.
-
E5CB Temperature Controller, 48 x 48 mm, Basic
Basic 48 x 48 mm temperature controller for heater control, with a character height of about 16 mm, 250 ms sampling and few parameters. Three-year warranty.
-
E5CC Digital Temperature Controller, 48 x 48 mm
48 x 48 mm digital temperature controller with a large white PV display and a short 60 mm body. Wide choice of inputs, outputs and options. The E5CC-B is the Value Design version for panel builders.
-
E5CC-CX2ASM-800 Digital Temperature Controller, 48 x 48 mm, Linear current Output, Standard
48 x 48 mm digital temperature controller, multi-input (thermocouple, Pt100, analog), linear current control output, 2 auxiliary outputs, 100 to 240 VAC, screw terminals.
-
E5CC-QX2ASM-800 Digital Temperature Controller, 48 x 48 mm, Voltage Output, Standard
48 x 48 mm digital temperature controller, multi-input (thermocouple, Pt100, analog), voltage (SSR drive) control output, 2 auxiliary outputs, 100 to 240 VAC, screw terminals.
-
E5CC-QX2ASM-802 Digital Temperature Controller, 48 x 48 mm, Voltage Output, RS-485 + CT
48 x 48 mm digital temperature controller, multi-input (thermocouple, Pt100, analog), voltage (SSR drive) control output, 2 auxiliary outputs, 100 to 240 VAC, screw terminals, RS-485 communications and heater-burnout CT input.
-
E5CC-RX2ASM-800 Digital Temperature Controller, 48 x 48 mm, Relay Output, Standard
48 x 48 mm digital temperature controller, multi-input (thermocouple, Pt100, analog), relay control output, 2 auxiliary outputs, 100 to 240 VAC, screw terminals.
-
E5CD Digital Temperature Controller, 48 x 48 mm, Status Detection
48 x 48 mm digital temperature controller that detects changes in the process status so control can be optimised for both productivity and quality. Available as E5CD and E5CD-B.
-
E5CN-H Advanced Digital Temperature Controller, 48 x 48 mm
48 x 48 mm advanced digital temperature controller with a 5-digit display at 0.01 degC resolution, 60 ms sampling and logic operations on the contact outputs.
-
E5CS Plug-in Temperature Controller, DIN 48 x 48 mm
Simple plug-in temperature controller in a DIN 48 x 48 mm case with DIP switch setting, two alarms and a 13.5 mm character height display. Universal-input models available.
-
E5CWL-Q1P Digital Temperature Controller, 48 x 48 mm, Voltage Output, Pt100 Input
48 x 48 mm digital temperature controller, voltage (SSR drive) control output, 1 alarm output, Pt100 input, 100 to 240 VAC.
-
E5CWL-Q1TC Digital Temperature Controller, 48 x 48 mm, Voltage Output, Thermocouple Input
48 x 48 mm digital temperature controller, voltage (SSR drive) control output, 1 alarm output, thermocouple input, 100 to 240 VAC.
-
E5CWL-R1P Digital Temperature Controller, 48 x 48 mm, Relay Output, Pt100 Input
48 x 48 mm digital temperature controller, relay control output, 1 alarm output, Pt100 input, 100 to 240 VAC.