Omron E5CWL-Q1P Digital Temperature Controller, 48 x 48 mm, Voltage Output, Pt100 Input
- Brand
- Omron
- Model number
- E5CWL-Q1P
- Category
- Temperature Controllers
48 x 48 mm digital temperature controller, voltage (SSR drive) control output, 1 alarm output, Pt100 input, 100 to 240 VAC.
Price and availability on request
We reply by email or phone, Monday to Saturday, 10:30 am to 6:30 pm.
Several models? Add each to your enquiry list and send them as one enquiry.
Key features
- 48 x 48 mm, only 60 mm behind the panel
- Dual 4-digit display, PV character height 16.2 mm
- ON/OFF or 2-PID control with auto-tuning
- 1 alarm output, 11 alarm types
- 250 ms sampling period
- Pt100 input
Specifications
| Series | E5CWL (E5CSL / E5CWL / E5EWL range) |
|---|---|
| Front size | 48 x 48 mm (1/16 DIN) |
| Display | 4-digit dual display (PV and SV), 7-segment, PV character height 16.2 mm |
| Setting method | Digital setting with front panel keys |
| Memory protection | Non-volatile memory, 100,000 writes |
| Standards | EN 61326-1, EN 61010-1, IEC 61010-1; VDE 0106 Part 100 (finger protection) with terminal cover mounted |
| Supplied with | Mounting adapter Y92F-49, instruction manual |
| Accessories (order separately) | Terminal cover E53-COV19, front panel E53-COV20 |
| Depth behind front panel | 60 mm (64 mm overall) |
|---|---|
| Panel cutout | 45 x 45 mm, recommended panel thickness 1 to 5 mm |
| Weight | Controller approx. 100 g, mounting bracket approx. 10 g |
| Power supply | 100 to 240 VAC, 50/60 Hz (operating range 85% to 110%) |
|---|---|
| Power consumption | 3.5 VA |
| Insulation resistance | 20 megohm min. (at 500 VDC) |
| Dielectric strength | 2,300 VAC, 50 or 60 Hz, 1 min (between terminals of different charge) |
| Control output | Voltage output for driving an SSR: 12 VDC (+25%/-15%, PNP), 21 mA max., short-circuit protected |
|---|---|
| Alarm output | 1 relay output: SPST-NO, 250 VAC, 1 A resistive load, electrical life 100,000 operations, minimum load 5 V / 10 mA |
| Sensor input | Platinum resistance thermometer Pt100 |
| Terminals | Solderless terminals, M3.5 screws |
| Input range | Pt100: -200 to 850 degC (or -199.9 to 500.0 degC); also -300 to 1,500 degF / -199.9 to 900.0 degF |
|---|---|
| Indication accuracy | Platinum resistance thermometer: ±0.5% of indicated value or ±1 degC, whichever is greater, ±1 digit max. |
| Influence of temperature, voltage and EMS | ±1% of PV or ±2 degC, whichever is greater, ±1 digit max. |
| Influence of signal source resistance | Platinum resistance thermometer: 0.6 degC/ohm max. (10 ohm max.) |
| Sampling period | 250 ms |
| Control method | ON/OFF or 2-PID control with auto-tuning |
|---|---|
| Hysteresis | 0.1 to 999.9 degC/degF (in units of 0.1) |
| Proportional band (P) | 0.1 to 999.9 degC/degF (in units of 0.1) |
| Integral time (I) | 0 to 3999 s |
| Derivative time (D) | 0 to 3999 s |
| Control period | 0.5, then 1 to 99 s |
| Alarm types | 11 selectable: deviation upper/lower limit, upper limit, lower limit, upper/lower range, absolute upper/lower limit, with or without standby sequence |
| Alarm setting range | -1999 to 9999 (decimal point position depends on input type) |
| Other functions | Temperature input shift, run/stop, protection functions |
| Ambient temperature | -10 to 55 degC, no icing or condensation |
|---|---|
| Ambient humidity | 25% to 85% |
| Storage temperature | -25 to 65 degC, no icing or condensation |
| Degree of protection | Front panel IP50, rear case IP20, terminals IP00 |
| Vibration resistance | 10 to 55 Hz, 20 m/s2, 10 min each in X, Y and Z directions (malfunction); 2 h (destruction) |
| Shock resistance | 100 m/s2 min. (malfunction), 300 m/s2 min. (destruction), 3 times each in X, Y and Z directions |
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering. Brand names, logos and model names are trademarks of their respective owners, used only to identify the product. Details