Kyoritsu
19 Kyoritsu products listed in this category. For prices and availability, send an enquiry.
Products
-
Enquire about KEW 8112
KEW 8112 AC Clamp Adaptor for Multimeters
AC clamp adaptor that turns current into a voltage for a digital multimeter, covering 0.1 mA to 120 A on 200 mA, 2 A and 20 A ranges, with no exposed metal parts.
-
Enquire about KEW 8115
KEW 8115 AC/DC Clamp Sensor for Multimeters
AC / DC clamp sensor that extends the current ranges of almost any digital multimeter without breaking the circuit; with the KEW 1051 / 1052 the meter reads directly in amps.
-
Enquire about KEW 8121
KEW 8121 Load Current Clamp Sensor, 24mm
Load current clamp sensor with a 24 mm jaw for the KEW 5010 and 5020 loggers.
-
Enquire about KEW 8122
KEW 8122 Load Current Clamp Sensor, 40mm
Load current clamp sensor with a 40 mm jaw for the KEW 5010 and 5020 loggers.
-
Enquire about KEW 8123
KEW 8123 Load Current Clamp Sensor, 55mm
Load current clamp sensor with a 55 mm jaw for the KEW 5010 and 5020 loggers.
-
Enquire about KEW 8124
KEW 8124 Leakage and Load Current Clamp Sensor, 68mm
Leakage and load current clamp sensor with a 68 mm jaw for the KEW 5010, 5020, 6305 and 6315.
-
Enquire about KEW 8125
KEW 8125 Load Current Clamp Sensor, 40mm
Load current clamp sensor with a 40 mm jaw for the KEW 6305 and 6315, also usable with the KEW 5010 and 5020 (marked * by Kyoritsu).
-
Enquire about KEW 8126
KEW 8126 Load Current Clamp Sensor, 40mm
Load current clamp sensor with a 40 mm jaw for the KEW 6305 and 6315, also usable with the KEW 5010 and 5020 (marked * by Kyoritsu).
-
Enquire about KEW 8127
KEW 8127 Load Current Clamp Sensor, 24mm
Load current clamp sensor with a 24 mm jaw for the KEW 6305 and 6315, also usable with the KEW 5010 and 5020 (marked * by Kyoritsu).
-
Enquire about KEW 8128
KEW 8128 Load Current Clamp Sensor, 24mm
Load current clamp sensor with a 24 mm jaw for the KEW 6305 and 6315, also usable with the KEW 5010 and 5020 (marked * by Kyoritsu).
-
Enquire about KEW 8130
KEW 8130 Flexible Clamp Sensor 1000A, 110mm
Flexible, lightweight air-core clamp sensor of 110 mm diameter for AC currents up to 1000 A. Rated CAT IV 300 V / CAT III 600 V.
-
Enquire about KEW 8133
KEW 8133 Flexible Clamp Sensor 3000A, 170mm
Flexible, lightweight air-core clamp sensor of 170 mm diameter for AC currents up to 3000 A. Rated CAT IV 300 V / CAT III 600 V.
-
Enquire about KEW 8146
KEW 8146 Leakage and Load Current Clamp Sensor, 24mm
Leakage and load current clamp sensor with a 24 mm jaw for the KEW 5010, 5020 and 6315. Not for power measurement.
-
Enquire about KEW 8147
KEW 8147 Leakage and Load Current Clamp Sensor, 40mm
Leakage and load current clamp sensor with a 40 mm jaw for the KEW 5010, 5020 and 6315. Not for power measurement.
-
Enquire about KEW 8148
KEW 8148 Leakage and Load Current Clamp Sensor, 68mm
Leakage and load current clamp sensor with a 68 mm jaw for the KEW 5010, 5020 and 6315. Not for power measurement.
-
Enquire about KEW 8161
KEW 8161 AC Clamp Sensor for Multimeters, 100A
AC clamp sensor that converts current into a voltage for a digital multimeter, for AC currents up to 100 A.
-
Enquire about KEW 8177
KEW 8177 Ior Leakage Current Clamp Sensor, 40mm
Ior leakage current clamp sensor with a 40 mm jaw, for use with the KEW 5050 Ior logger.
-
Enquire about KEW 8178
KEW 8178 Ior Leakage Current Clamp Sensor, 68mm
Ior leakage current clamp sensor with a 68 mm jaw, for use with the KEW 5050 Ior logger.
-
Enquire about KEW 8309
KEW 8309 Voltage Sensor for Floating Voltage
Voltage sensor for the KEW 5020 logger that measures floating (ungrounded phase-to-phase) voltage. The KEW 5020-01 set is the logger supplied with one KEW 8309.
