Veritek VIPS-VFT-02 Voltage and Frequency Monitoring Relay
- Brand
- Veritek
- Model number
- VIPS-VFT-02
- Category
- Protection & Monitoring Relays
Voltage and frequency monitoring relay with 3-digit LED: under/over voltage and frequency, phase fail, reversal and asymmetry.
Price and availability on request
Key features
- Programmable: Under/Over voltage
- Under/Over Frequency
- Phase reversal, Phase fail & Voltage Asymmetry
- Power ON Delay & Auto Reset Time
- Configurable for 1 phase and 3 phase
- Programmable delay and hysteresis
- Individual faults can be deactivated as per system requirement
- Auto/manual reset option
- Consistent reliability with high accuracy
- 3 digit bright LED display
- LED indication for healthy and faulty status
- True RMS Measurement
Specifications
| Parameters measured | Voltage (line-neutral); Frequency |
|---|
| Display | 3 digits, 1 row 7 segment LED Display |
|---|---|
| Digit Height | 0.39" (9.9 mm) |
| Display Range | 999 |
| System | 1Ø-2 wire / 3Ø-4 wire |
| Burden on supply | < 3VA |
| Delay | 0.2 to 99 sec |
| Accuracy | Class 1 |
| De-energise | On trip |
| Set Point (Voltage) | 180 - 300V |
| Hysteresis | 0 - 50V |
| Voltage Asymmetry | 0 - 50V |
| Set Point (Frequency) | 45 - 65 Hz |
| Scroll Time | 5 seconds |
| Safety Standard | IEC61010-1 |
| Insulation Test Voltage | 2 kV AC, 50Hz for 1 Minute between Aux. & Measuring Inputs |
| Relay Contacts | 1 Potential free Contact (NO, C & NC) |
|---|---|
| Contact Rating | 6A/230VAC/28VDC |
| Humidity | < 95 RH |
|---|
| Protection Degree | IP20 (Terminals), IP54 (Front of Housing) |
|---|---|
| Dimensions | 90 x 45 x 75 mm (LxBxH) |
| Mounting | DIN Rail (35 mm) / 2x M4 screw |
| Weight | 180 gm |
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Veritek VIPS 101
Veritek VIPS 101 Three-Phase Voltage Monitoring Relay
Slim DIN-rail three-phase relay for under voltage, over voltage and phase reversal, ±25% set point, 0.2 – 10 s delay.
-
Enquire about Veritek VIPS 102
Veritek VIPS 102 Under Voltage Relay with Delayed Restart
Slim DIN-rail under voltage relay with delayed restart (5 – 15 min), for 1- or 3-phase systems.
-
Enquire about Veritek VIPS 33PSR
Veritek VIPS 33PSR Phase Sequence and Failure Relay
Slim DIN-rail three-phase relay for under/over voltage, phase failure, imbalance and phase reversal, 415 V nominal, auto reset.
-
Enquire about Veritek VIPS 83M
Veritek VIPS 83M Multifunction Meter with Protection Relay
Three-phase meter and protection relay, 4-line LED: volts, amps, frequency, run hours and earth fault current, with relay output.
