54, Ezra Street , Kolkata - 700001 , West Bengal, IndiaMonday to Saturday, 10:30 am to 6:30 pm

Industrial Supply Syndicate Kolkata, since 1977 Send an enquiry
Selec OPS2x4-200 Open Frame Power Supply OPS2x4-200

Selec OPS2x4-200 Open Frame Power Supply OPS2x4-200

Brand
Selec
Model number
OPS2x4-200

Selec OPS2x4-200 open frame power supply: input 90 - 264 VAC (127 - 370 VDC), output 12 V to 48 V, open frame.

Price and availability on request

Request a quote

Sent with the product details: Selec OPS2x4-200 Open Frame Power Supply OPS2x4-200.

A phone number or an email address is needed, so we can reply.

We use these details only to reply to your enquiry. See our privacy notice.

Key features

  • 4 x 2 x 1.16 Inches Form factor
  • 200 Watts with Forced Air Cooling; 130 Watts Convection Cooling
  • Efficiencies up to 93 %
  • -40°C to + 70°C operating temperature
  • 12V/0.5A Fan Output, Thermal Shut-Down feature
  • Medical (BF) Safety Approvals
  • No Load Power < 0.5W
  • Approved to Household, ITAV and Medical standards

Specifications

Specifications
Input Voltage90 - 264 VAC (127 - 370 VDC)
Input Frequency47 - 63 Hz
Inrush Current< 60 Amps; Measured at 264 VAC, 25°C Ambient, Cold start
No Load Power< 0.5 W ; 115 VAC input
Output Voltage12 V to 48 V
Output Power200 W
Voltage Tolerance± 1 %
Line Regulation± 0.5
Load Regulation± 1 %
Turn On Time< 2 sec at full load
Hold Up Time> 20 msec at convection load & > 10 msec at full load for nominal Vout
Rise Time< 100 ms
Fan output12 V, 0.5 A output is available on a 2 pin connector header
Overload Protection110% of rated output current; Hiccup type; Autorecovery
Overvoltage ProtectionLatched type; Input AC power to be recycled to recover the power supply
Output Short Circuit ProtectionHiccup mode when output is shorted; Autorecovery type
Over Temperature ProtectionPower supply shuts down when the temperature of PCB below main transformer reaches typically 120°C
Operating Temp-40°C to +70°C; De-rate linearly above 50°C from 100% load at 50°C to 50% load at 70°C Note : Only start up guaranteed at -40°C with spec deterioration
Storage Temp- 40°C to + 85°C
CoolingNatural convection cooled or Forced Air cooled as per power requirements
Humidity5 to 95 % RH, Non condensing
Altitude2000 m
Dimension4” x 2” x 1.16” (L x W x H); Height above PCB: 1”
Weight< 180 gms
MountingOpen Frame
Ordering codes
OPS2x4-200-12-A-1-CUDescription Open Frame Power Supply with 4 x 2 x 1.16 Inches Form factor, 12V, 16.67A, 200 Watts with Forced Air Cooling & 12V, 10.84A, 130 Watts Convection Cooling, Certification UL, CB
OPS2x4-200-15-A-1-CUDescription Open Frame Power Supply with 4 x 2 x 1.16 Inches Form factor, 15V, 13.34A, 200 Watts with Forced Air Cooling & 15V, 8.67A, 130 Watts Convection Cooling, Certification UL, CB
OPS2x4-200-24-A-1-CUDescription Open Frame Power Supply with 4 x 2 x 1.16 Inches Form factor, 24V, 8.34A, 200 Watts with Forced Air Cooling & 24V, 5.42A, 130 Watts Convection Cooling, Certification UL, CB
OPS2x4-200-48-A-1-CUDescription Open Frame Power Supply with 4 x 2 x 1.16 Inches Form factor, 48V, 4.17A, 200 Watts with Forced Air Cooling & 48V, 2.71A, 130 Watts Convection Cooling, Certification UL, CB

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.

Related products