Meco LCR999A Handheld LCR Meter
- Brand
- Meco
- Model number
- LCR999A
- Category
- Component Testers
Handheld LCR meter with 0.1% basic accuracy, up to 10 measurements/s, automatic identification, 4-level tolerance comparator and mini-USB (SCPI).
Price and availability on request
Key features
- Large LCD display with bright white backlight
- Ultra low power consumption, battery powered for 24 hours of continuous use
- Automatic identification function (Ai)
- 9V battery & External power supply
- Automatic correction function with datahold, max. / min. / average recording
- Utility function configuration & current setup recovery after power off
- Standard Mini-USB interface, SCPI compatible
- Auto power Off
Specifications
| Tolerance comparator (percentage display) | 1%, 5%, 10% & 20% |
|---|---|
| Constant output impedance | 100 ohm |
| Contents | 5 Terminal Kelvin Test Leads x 1 Pc; 7.2V Ni MH Rechargeable Battery x 1 Pc; Instruction Manual x 1 Pc; Short Circuit Plate x 1 Pc; 12V / 300mA AC Adaptor x 1 Pc |
|---|
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about HTC Instruments
HTC Instruments Smart SMD Tester
Tweezer-type SMD tester for capacitance (3 nF – 30 mF), resistance (300 Ω – 30 MΩ), diode and continuity. 3000 counts, auto and manual ranging, auto scanning. Runs on a CR2032 cell.
-
Enquire about Kusam Meco 307
Kusam Meco 307 Digital Multimeter with LCR Functions
Auto-ranging 4000-count multimeter with inductance (1 µH – 40 H), capacitance (1 pF – 100 µF) and resistance, plus 20 A current, frequency to 9.999 MHz, duty cycle and hFE.
-
Enquire about Kusam Meco 333
Kusam Meco 333 3½-Digit Digital Capacitance Meter
3½-digit capacitance meter, 0.1 pF to 200 mF in 10 ranges, ±0.5% basic accuracy, with capacitor discharge function and zero adjustment knob.
-
Enquire about Hioki 3504-40
Hioki 3504-40 C HiTester with RS-232C
High-speed C meter (capacitance and D) for production: 2 ms measurement at 120 Hz or 1 kHz, constant-voltage mode for voltage-dependent capacitors; probes and fixtures sold separately. Built-in RS-232C interface.
