Meco DBM72 Digital Battery Load Tester, up to 200 Ah
- Brand
- Meco
- Model number
- DBM72
- Category
- Battery Testers
80 A load tester for 6 / 12 V lead-acid and Li-ion batteries of 40 – 200 Ah, with 10 s auto cut-off, internal resistance test and LED condition display.
Price and availability on request
Key features
- 80A Discharge Current Load Test for 6V/12V (40Ah - 200Ah) Lead Acid and Li-ion Battery
- Built-In 10 Seconds Timer to Auto Cut-Off Load After Test
- Temperature Rise is Controlled (for Circuit Protection)
- Two Way Internal Resistance Measurement (Load Test Method & 4-Wires Method)
- Auto Data Hold
Specifications
| LED Indication of Battery Condition | GOOD (Green), WEAK (Yellow) & BAD (Red) |
|---|---|
| Rated Voltage of Battery to be Tested | 6, 12V DC |
| Rated Capacity of Battery to be Tested | 40 ~ 200Ah |
| Battery Load Test Current | 80A |
| Weight | 900gms (approx.) |
| Dimensions | 205 x 115 x 70mm (approx) |
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Meco 6363
Meco 6363 Battery Capacity (Impedance) Tester, up to 500 Ah / 40 V
Battery impedance tester for up to 500 Ah and 40 V: internal resistance 40 mΩ – 40 Ω and voltage on-line, PASS / WARNING / FAIL comparator, RS-232.
-
Enquire about Meco 6390
Meco 6390 Battery Capacity (Impedance) Tester, up to 1200 Ah / 60 V
Battery tester for up to 1200 Ah and 60 V: internal resistance from 4 mΩ, voltage, 600 A DC current and temperature, SOC, data logging on micro SD.
-
Enquire about Meco ABM18
Meco ABM18 Analog Battery Load Tester, up to 200 Ah
Analog load tester for 2, 6 and 12 V motorcycle and car batteries of 2 – 200 Ah; dial shows full, normal, recharge or discharge.
-
Enquire about Meco BCM 6300
Meco BCM 6300 Battery Capacity (IR) Meter
Four-wire battery internal resistance meter, 19.999 mΩ – 199.99 Ω at 1 kHz, voltage to 99.999 V, temperature, 30 comparator settings.
