54, Ezra Street , Kolkata - 700001 , West Bengal, IndiaMonday to Saturday, 10:30 am to 6:30 pm

Industrial Supply Syndicate Kolkata, since 1977 Send an enquiry
Mean Well TDR-960-24 DIN Rail Power Supply 24 V, 40 A, 960 W, 3-Phase Input
  • Mean Well TDR-960-24 DIN Rail Power Supply 24 V, 40 A, 960 W, 3-Phase Input

Mean Well TDR-960-24 DIN Rail Power Supply 24 V, 40 A, 960 W, 3-Phase Input

Model number
TDR-960-24

Mean Well TDR-960-24, a DIN rail power supply for 3-phase input from the TDR-960 series for 340-550 V AC input, up to 94% efficient, for control panels fed from a 3-phase supply.

Price and availability on request

Request a quote

Sent with the product details: Mean Well TDR-960-24 DIN Rail Power Supply 24 V, 40 A, 960 W, 3-Phase Input.

A phone number or an email address is needed, so we can reply.

We use these details only to reply to your enquiry. See our privacy notice.

Key features

  • Three-Phase 340 ~ 550VAC wide range input (Dual phase operation possible)
  • Width only 110mm
  • Built-in active PFC function compliance to BS EN/ EN61000-3-2
  • High efficiency 94.5% and low power dissipation
  • Protections: Short circuit / Overload / Over voltage / Over temperature
  • Cooling by free air convection
  • Built-in constant current limiting circuit
  • Can be installed on DIN rail TS-35/7.5 or 15
  • UL508(industrial control equipment)approved
  • BS EN/EN61000-6-2(BS EN/EN50082-2) industrial immunity level
  • Current sharing up to 3840W(3+1)
  • Built-in DC OK relay contact
  • 100% full load burn-in test
  • 3 years warranty

Specifications

Output
DC voltage24V
Rated current40A
Current range0 ~ 40A
Rated power960W
Ripple & noise (max.)180mVp-p
Voltage adj. range24 ~ 28V
Voltage tolerance±1.0%
Line regulation±0.5%
Load regulation±1.0%
Setup, rise time1000ms, 100ms/400VAC 800ms, 100ms/500VAC at full load
Hold up time (typ.)12ms / 400VAC 14ms / 500VAC at full load
Input
Voltage rangeThree-Phase 340 ~ 550VAC (Dual phase operation possible) 480
Frequency range47 ~ 63Hz
Power factor (typ.)PF≧0.88/400VAC PF≧0.86/500VAC at full load
Efficiency (typ.)94%
AC current (typ.)2A/400VAC 1.4A/500VAC
Inrush current (typ.)COLD START 60A
Leakage current<3.5mA / 530VAC
Protection
Overload105 ~ 130% rated output power; Protection type : Constant current limiting, unit will shut down after 3 sec. ,re-power on to recover
Over voltage29 ~ 33V; Protection type : Shut down o/p voltage, re-power on to recover
Over temperatureShut down o/p voltage, recovers automatically after temperature goes down
Function
DC OK relay contact ratings (max.)60Vdc/0.3A, 30Vdc/1A, 30Vac/0.5A resistive load
Current sharingPlease refer to function manual
Environment
Working temp.-30 ~ +70℃ (Refer to "Derating Curve")
Working humidity20 ~ 95% RH non-condensing
Storage temp., humidity-40 ~ +85℃, 10 ~ 95% RH non-condensing
Temp. coefficient±0.03%/℃ (0 ~ 50℃)
VibrationComponent:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X
Safety & EMC
Safety standardsUL508, AS/NZS62368.1, EAC TP TC 004 approved, IEC62368-1
Withstand voltageI/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC O/P-DC
Isolation resistanceI/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25℃/ 70% RH
EMC emissionCompliance to BS EN/EN55032 (CISPR32), BS EN/EN61204-3 Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020
EMC immunityCompliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55024, BS EN/EN61000-6-2 (BS EN/EN50082-2), BS EN/EN61204-3,; heavy industry level, EAC TP TC 020
Others
MTBF647.1K hrs min. Telcordia SR-332 (Bellcore) ; 59.5K hrs min.
Dimension110*125.2*150mm (W*H*D)

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.

Related products