Mean Well RSP-2000-12 Enclosed Switching Power Supply 12 V, 100 A, 1200 W

Model number
RSP-2000-12

Mean Well RSP-2000-12, an enclosed switching power supply from the RSP-2000 series for 90-264 V AC input, up to 87% efficient, for machines, control panels and LED systems.

Price and availability on request

Request a quote

Sent with the product details: Mean Well RSP-2000-12 Enclosed Switching Power Supply 12 V, 100 A, 1200 W.

A phone number or an email address is needed, so we can reply.

We use these details only to reply to your enquiry. See our privacy notice.

Key features

  • Universal AC input / Full range
  • Built-in active PFC function
  • High efficiency up to 92%
  • Forced air cooling by built-in DC fan
  • Output voltage programmable
  • Active current sharing up to 8000W (3+1)
  • Built-in remote ON-OFF control / remote sense / auxiliary power / DC OK signal / OTP alarm signal
  • Protections: Short circuit / Overload / Over voltage / Over temperature
  • Optional conformal coating
  • 5 years warranty

Specifications

Output
DC voltage12V
Rated current100A
Current range0 ~ 100A
Rated power1200W
Ripple & noise (max.)150mVp-p
Voltage adj. range10.5 ~ 14V
Voltage tolerance±2.0%
Line regulation±1.0%
Load regulation±1.0%
Setup, rise time1500ms, 60ms/230VAC at full load
Hold up time (typ.)16ms/230VAC at 75% load 10ms/230VAC at full load
Input
Voltage range90 ~ 264VAC 250 ~ 320VDC
Frequency range47 ~ 63Hz
Power factor (typ.)0.97/230VAC at full load
Efficiency (typ.)87%
AC current (typ.)13A/115VAC 7A/230VAC
Inrush current (typ.)COLD START 50A
Leakage current<2mA / 240VAC
Protection
Overload105 ~ 125% rated output power; Protection type : Constant current limiting, unit will shut down o/p voltage after 5 sec. re-power on to recover
Over voltage14.7 ~ 17.5V; Protection type : Shut down o/p voltage, re-power on to recover
Over temperatureShut down o/p voltage, recovers automatically after temperature goes down
Function
Voltage programmable(PV)Adjustment of output voltage is allowable to 40 ~ 115% of nominal output voltage. Please refer to the Function Manual.
Current sharingUp to 8000W or (3+1) units. Please refer to
Auxiliary power5V @ 0.3A, 12V @ 0.8A
Remote ON-OFF controlBy electrical signal or dry contact Power ON:open Power OFF:short. Please refer to the Function Manual.
Remote senseCompensate voltage drop on the load wiring up to 0.5V. Please refer to the Function Manual.
DC OK signalThe isolated TTL signal out. Please refer to the Function Manual.
Environment
Working temp.-35 ~ +70℃ (Refer to "Derating Curve")
Working humidity20 ~ 90% RH non-condensing
Storage temp., humidity-40 ~ +85℃, 10 ~ 95% RH non-condensing
Temp. coefficient±0.03%/℃ (0 ~ 50℃)
Vibration10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
Safety & EMC
Safety standardsUL62368-1, CSA C22.2 No. 62368-1, TUV BS EN/EN62368-1, BSMI CNS15598-1, AS/NZS62368.1,; BIS IS13252(Part1): 2010/IEC 60950-1:2005 (except 48V), EAC TP TC 004 approved
Withstand voltageI/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
Isolation resistanceI/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
Others
Dimension295*127*41mm (L*W*H)

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.