Mean Well DDRH-15-05DR DC-DC Converter 150-1500 V DC In, 5 V, 2 A, 10 W, DIN Rail

Model number
DDRH-15-05DR

Mean Well DDRH-15-05DR DC-DC converter from the DDRH-15 series, taking 150-1500 V DC input and giving a regulated 5 V output at up to 78% efficiency. Made for solar and battery systems with very high DC voltages.

Price and availability on request

Request a quote

Sent with the product details: Mean Well DDRH-15-05DR DC-DC Converter 150-1500 V DC In, 5 V, 2 A, 10 W, DIN Rail.

A phone number or an email address is needed, so we can reply.

We use these details only to reply to your enquiry. See our privacy notice.

Key features

  • 150~1500Vdc 10:1 ultra-wide input range
  • 4KVac l/O high isolation(Reinforced isolation)
  • Protections: Short circuit / Overload / Over voltage / DC input under voltage / DC input reverse Polarity
  • Fanless design, fully encapsulated, cooling by free air convection
  • Can be installed on DlN rail TS-35/7.5 or 15 (DR-Type)
  • 40~+80℃ ultra-wide operating temperature (>+50℃ derating)
  • Operating altitude up to 5000 meters
  • 3 years warranty
  • DDRH-15-xxST

Specifications

Output
DC voltage5V
Rated current2A
Voltage accuracy±2.0%
Rated power5Vo: 10W 12Vo ~ 24Vo: 15W
Ripple & noise5 ~ 15Vo: 100mVp-p 24Vo: 150mVp-p
Line regulation±1%
Load regulation±1% (10% Load to Full Load)
Switching frequency (typ.)25 ~ 75.6KHz
Hold up time16ms min. @Vin=800Vdc
Setup time1s max. @150~1500Vdc
Input
Efficiency (typ.)78%
Voltage range150 ~ 1500Vdc
FilterPi type
Inrush current (typ.)Cold start 150A max. @ Vin=800Vdc
Protection
Short circuitProtection type : Hiccup mode, continuous, automatic recovery; 110 ~ 300% rated output power; Protection type : Hiccup mode, recovers automatically after fault condition is removed
Over voltage protectionHiccup mode, recovers automatically after fault condition is removed
Reverse polarityBy internal Bridge Diode, no damage, recovers automatically after fault condition removed; Start-up voltage 147Vdc; Shutdown voltage 137Vdc
Environment
Working temp.-40 ~ +80℃ (Refer to "Derating Curve")
Working humidity20% ~ 90% RH non-condensing
Storage temp., humidity-40 ~ +85℃, 10 ~ 95% RH non-condensing; ±0.02% ℃ 50℃)
Temp. coefficient environment/ (0 ~
VibrationComponent: 10 ~ 500Hz, 3G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting clip: Compliance to IEC60068-2-6
Operating altitude5000 meters
Over voltage categoryⅡ; According to EN62109-1; altitude up to 5000 meters
Safety & EMC
Safety standardsUL1741, CSA C22.2 No.107.1-16, IEC62109-1(LVD), EAC TP TC 004 approved
Withstand voltageI/P-O/P:4KVac
EMC immunityRadiated Susceptibility BS EN/EN61000-4-3 Level 3, 10V, criteria A; EFT/Bursts BS EN/EN61000-4-4 Level 2, 0.5KV, criteria A; Surge BS EN/EN61000-4-5 Level 4, 2KV/Vin+ ~ Vin-, criteria A; Conducted BS EN/EN61000-4-6 Level 3, 10V, criteria A
Others
MTBF388Khrs MIL-HDBK-217F(25℃)
Dimension122.3*57.3*43.5mm (L*W*H)
Case materialNon-conductive black plastic (UL 94V-0 rated)
Potting materialUL 94V-0
Packing215g ; 6pcs/Tray, 18pcs/per carton
Pin materialBase: copper, Plating: Matte Tin
Other specifications
No load input current0.2mA
Full load input current25mA
Capacitor load (max.)2000μF

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.