MCM Instruments VT-20 Vibration Transmitter (4-20 mA)
- Brand
- MCM Instruments
- Model number
- VT-20
- Category
- Vibration & Bearing Testers
Stainless steel top-entry vibration transmitter with a 4-20 mA output proportional to RMS velocity, for direct connection to PLC, DCS and display controllers; IP65, 24 V DC, to ISO 10816-3.
Price and availability on request
Key features
- For use with PLC / DCS / local display controllers
- Customisable vibration range
- 4-20 mA velocity output
- Stainless steel housing for harsh environments
- Internal electronics enclosed and isolated to minimise noise
- Applications: thermal power, pulp and paper, automotive, cement, mining, pharmaceutical
Specifications
| Output | 4-20 mA DC proportional to RMS velocity (mm/s) |
|---|---|
| Vibration range (customisable) | 0 - 10, 0 - 20, 0 - 40 or 0 - 50 mm/s |
| Frequency response | 10 - 1000 Hz |
| Output impedance | < 500 Ω |
| Axis | Single (standard) |
| Standard | ISO 10816-3 |
| Power supply | 24 V DC |
|---|---|
| Operating temperature | -20 to 80 °C |
| Housing | Stainless steel, IP65 |
| Isolation | Outer casing isolation |
| Connector | Aviation plug, M10 x 1.5, water-proof |
| Size | 30 x 35 x 66 mm |
| Weight | 135 g |
| Contents | Vibration Transmitter VT-20; Connecting cable (1 m) with aviation plug; Calibration certificate; Instruction sheet; Warranty card; Pouch |
|---|
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about MCM Instruments 110
MCM Instruments 110 Bearing (Shock Pulse) Condition Analyzer
Microprocessor-based shock pulse bearing analyser: -19 to 99 dBpv with good / reduced / bad indication, lubrication condition and damage severity readings for rolling bearings, single-point memory.
-
Enquire about MCM Instruments 802
MCM Instruments 802 Machine Conditioner
Machine conditioner for imbalance, misalignment and gear faults: vibration velocity and acceleration to 199.9 and displacement to 2828 µm Peak-Peak, 10 Hz to 1 kHz, data hold; rechargeable, 600 g.
-
Enquire about MCM Instruments 802T
MCM Instruments 802T Machine Conditioner with IR Temperature
Machine conditioner for imbalance, misalignment and gear faults: vibration velocity, acceleration and displacement plus non-contact infrared temperature from 0 to 550 °C; rechargeable, 600 g.
-
Enquire about MCM Instruments 803
MCM Instruments 803 Machine Conditioner
Three functions in one for imbalance, misalignment and gear faults: vibration velocity, acceleration and displacement, a laser tachometer from 10 to 30000 rpm and an electronic stethoscope; rechargeable.
