MCM Instruments VIB-33 EX Intrinsically Safe Vibration Meter
- Brand
- MCM Instruments
- Model number
- VIB-33 EX
- Category
- Vibration & Bearing Testers
Intrinsically safe vibration meter for hazardous Zones 1 and 2 (Ex ib IIB): velocity 0.1 to 99.9 mm/s True RMS, 10 Hz to 1 kHz, to ISO 10816-3, with the AM 100 accelerometer.
Price and availability on request
Key features
- Intrinsically safe for use inside and outside hazardous zones
- Velocity measurement for basic vibration analysis
- Based on ISO 10816-3 recommendations
- Microcontroller based
- Backlit large-character display
- Auto off
- Battery low indication
Specifications
| Velocity range | 0.1 - 99.9 mm/s True RMS and Peak 141 mm/s |
|---|---|
| Resolution | 0.1 mm/s |
| Accuracy | ±(2% + 0.1 mm/s) |
| Frequency range | 10 Hz - 1 kHz (60 - 60000 cpm) |
| Marking | Ex ib IIB IP40 (-10 °C ≤ Tamb ≤ +60 °C) |
|---|---|
| Standards | IS/IEC 60079-0:2004, IS/IEC 60079-11:2006 and IS/IEC 60529:2001 |
| Zones | 1 and 2 |
| Type | Piezo-electric accelerometer with integral electronics, linear up to 2 kHz, up to 100 °C, stainless steel acid-proof casing |
|---|
| Display | 2 x 8 dot matrix LCD, large characters with back light |
|---|---|
| Power | 9 V DC alkaline battery |
| Weight | 300 g with sensor |
| Casing | ABS plastic with anti-stick coating |
| Contents | Vibration Meter VIB-33 - 1 no; Sensor - 1 no; Cable with connectors - 1 no; Magnetic base - 1 no; Hand-held probe rod - 1 no; Protective cover - 1 no; Battery 9 V - 1 no; Manual - 1 no; Carry case - 1 no; Warranty card with calibration certificate - 1 no |
|---|
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about MCM Instruments 110
MCM Instruments 110 Bearing (Shock Pulse) Condition Analyzer
Microprocessor-based shock pulse bearing analyser: -19 to 99 dBpv with good / reduced / bad indication, lubrication condition and damage severity readings for rolling bearings, single-point memory.
-
Enquire about MCM Instruments 802
MCM Instruments 802 Machine Conditioner
Machine conditioner for imbalance, misalignment and gear faults: vibration velocity and acceleration to 199.9 and displacement to 2828 µm Peak-Peak, 10 Hz to 1 kHz, data hold; rechargeable, 600 g.
-
Enquire about MCM Instruments 802T
MCM Instruments 802T Machine Conditioner with IR Temperature
Machine conditioner for imbalance, misalignment and gear faults: vibration velocity, acceleration and displacement plus non-contact infrared temperature from 0 to 550 °C; rechargeable, 600 g.
-
Enquire about MCM Instruments 803
MCM Instruments 803 Machine Conditioner
Three functions in one for imbalance, misalignment and gear faults: vibration velocity, acceleration and displacement, a laser tachometer from 10 to 30000 rpm and an electronic stethoscope; rechargeable.
