MCM Instruments ES-801 Electronic Stethoscope
- Brand
- MCM Instruments
- Model number
- ES-801
- Category
- Vibration & Bearing Testers
Electronic stethoscope for locating machinery noise in industrial environments: a listening probe and headset for valve chatter, tappet noise, piston slap, gear and pump noise; 5 Hz to 10 kHz, 9 V battery.
Price and availability on request
Key features
- Locates the source of mechanical noise in noisy environments
- Traces, amplifies and assesses valve chatter, tappet noise, piston slap, gear and pump noise and relay operation
- Two output volume levels
- Power on and battery low indication
- Auto or manual switch-off
Specifications
| Frequency range | 5 Hz to 10 kHz |
|---|---|
| Output volume | Two levels (high and low) |
| Head set | 200 Ω |
| Switching off | Auto / manual |
| Battery | 9 V alkaline, about 27 hours continuous use |
|---|---|
| Head phone dimensions | 220 x 130 x 100 mm |
| Casing | ABS plastic |
| Contents | Probe tip 220 mm; Head phone; 9 V alkaline battery; Instruction sheet; Carry case; Test and calibration report with warranty / guarantee certificate |
|---|
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about MCM Instruments 110
MCM Instruments 110 Bearing (Shock Pulse) Condition Analyzer
Microprocessor-based shock pulse bearing analyser: -19 to 99 dBpv with good / reduced / bad indication, lubrication condition and damage severity readings for rolling bearings, single-point memory.
-
Enquire about MCM Instruments 802
MCM Instruments 802 Machine Conditioner
Machine conditioner for imbalance, misalignment and gear faults: vibration velocity and acceleration to 199.9 and displacement to 2828 µm Peak-Peak, 10 Hz to 1 kHz, data hold; rechargeable, 600 g.
-
Enquire about MCM Instruments 802T
MCM Instruments 802T Machine Conditioner with IR Temperature
Machine conditioner for imbalance, misalignment and gear faults: vibration velocity, acceleration and displacement plus non-contact infrared temperature from 0 to 550 °C; rechargeable, 600 g.
-
Enquire about MCM Instruments 803
MCM Instruments 803 Machine Conditioner
Three functions in one for imbalance, misalignment and gear faults: vibration velocity, acceleration and displacement, a laser tachometer from 10 to 30000 rpm and an electronic stethoscope; rechargeable.
