54, Ezra Street , Kolkata - 700001 , West Bengal, IndiaMonday to Saturday, 10:30 am to 6:30 pm

Industrial Supply Syndicate Kolkata, since 1977 Send an enquiry
Masibus VMS4SE Multichannel Vibration Monitor

Masibus VMS4SE Multichannel Vibration Monitor

Brand
Masibus
Model number
VMS4SE

Masibus VMS4SE multichannel vibration monitor: input Thermocouple, RTD, voltage, current, output 0/4 to 20 mA (Isolated). For cooling towers, pumps.

Price and availability on request

Request a quote

Sent with the product details: Masibus VMS4SE Multichannel Vibration Monitor.

A phone number or an email address is needed, so we can reply.

We use these details only to reply to your enquiry. See our privacy notice.

Key features

  • 4 / 8 channel Vibration Input Module
  • Optional 8 Channel Universal Analog Input Module
  • 3 I/P & 2 O/P Slots capacity
  • Compact and Rugged Panel Mount
  • Extruded Aluminum Chassis with IP-55 front
  • Field Configurable for Acceleration, Velocity or Displacement range
  • Fast sampling and generation of Alarm/Trip
  • User free mapping of Relay to Channels
  • Comprehensive alarm/trip logic
  • Alpha-Numeric display for programmable tag no / Engg unit
  • RS485 Serial port (one standard and second optional)
  • 1 x Ethernet port (optional)
  • Analog output (4-20 mA) [Optional]
  • Field interface Buffer output Module
  • Modbus RTU over serial and Modnet over Ethernet Protocols

Specifications

Accelerometer Input
No of Modules1 (4 ch), 2 (8ch)
Sensitivity100mV/g standard 500mV/g (On request)
Dynamic Range80 g pk
Measurement Parameters
Acceleration0 to 50.0g (RMS, Pk) / 0.1g
Velocity0 to 100.0mm/sec (RMS, Pk) / 0.1mm/sec
Displacement0 to 2000microns (Pk-Pk)# / 1 micron #Derived peak
Sensor Excitation Current4 mA approx.
Scan Time50 mSec/channel
Frequency Range (Factory Set)High pass: 2.5Hz,5Hz,10Hz Low pass: 1KHz,2.5KHz,10KHz -3dB filter accuracy : ± 10%
Analog Input (Optional)
No. of AI Modules1 (8 ch.)
Input TypeThermocouple, RTD, voltage, current
Input RangeRefer table-1
ADC Resolution17 bits
Display Resolution0.1 / 1.0 °C
Sampling RateT/C & Voltage/current: 50mSec/channel RTD: 100mSec/channel
Display Scan Rate1 to 99 Sec (Programmable)
CJCAuto/ manual/ external for T/C type
Sensor OpenAll inputs except 0-5V, 0-10VDC
Sensor Burnout Current0.4uA
RTD Excitation Current250uA (Approx.)
NMRR> 40dB
CMRR> 120dB
Temp-Co< 100ppm/°C
Input Impedance> 1MΩ
Max. Voltage20VDC
Connector Type24 pin Rectangular connector/25 pin D sub Connector
Display and Keys
Channel Number2-Digit, 0.56", green seven segment LED
Measuring Parameter Value4-Digit, 0.56", red seven segment LED
Engineering Unit6-Digit, 0.3", orange alphanumeric LED
Status LEDsManual, run, flt, Tx/Rx, relay status Alarm/control status per channel
Keys2 X 4 For configuration, operation and calibration
Output
Relays8 Nos. per card
Rating2A @ 250VAC / 30VDC ; 100mA@30VDC
Connector Type25 D-Sub
Open Collector (OC) Output (Optional)
OC Outputs16
Analog Output (Optional)
No of OutputsMax. upto 8 nos. per card
Output Types0/4 to 20 mA (Isolated)
Load500Ω Max.
Communication Output
RS485-1 (Standard) & RS485-2 (Optional)
ProtocolModbus-RTU slave
Baud Rate9600 or 19200
Connector2 Pin, plug-in terminals
Ethernet (Optional)
ProtocolModbus - TCP/IP (Modnet) slave
Baud Rate10 Mbps
ConnectorRJ45
PROFINET (Optional)
Device TypeProfinet I/O Device
Communication ProtocolProfinet
Network TopologyMRP (Media Redundancy Protocol), STAR, LINE
Network Port2 Nos (RJ-45)
Max . II/nP/,O Ou/tp B Dyatetas256 IN / 256 OUT Bytes*
Network Speed10/100 Mbps, Auto-negotiation & Auto-crossover
Data Transport LayerEthernet II, IEEE 802.3
Configuration FileGSDML available
MCoanxf oI/rPm, Oan/pc eD CaltaassClass C
ETHERNET/IP (Optional)
Device TypeEtherNet/IP Adapter (Slave)
Communication ProtocolEtherNet/IP
Network TopologyDLR (Device Level Ring), TREE, LINE
Network Port2 Nos (RJ-45)
Max . II/nP/,O Ou/tp B Dyatetas504 IN / 504 OUT Bytes*
Network Speed10/100 Mbps, Auto-negotiation & Auto-crossover
Data Transport LayerEthernet II, IEEE 802.3
No. of Output Per Card4 nos.
Output Impedance<100 ohms
Frequency Range0.5Hz to 10KHz
D+ D- SEBUFF OUTP D+ D- S1+ 1 Field InterER BUFFER BUFFER BUFFER UT-1 OUTPUT-2 OUTPUT-3 OUTPUT-4 - S 2+ 2- S 3+ 3- S 4+ 4- S face Module (BNC Port)
Data Logging (Optional)
Memory25MB (Periodic), 7MB (Event)
Logged Data RetrievalVIA mVSCAN Software
Min. Periodic Log Time1 min
No. of Records101888 X / 256 (2XNo. of Ch) +12
Power Supply
Voltage85-265VAC, 50/60 Hz / 100-295 VDC 18 - 36VDC (Optional)
Input Type Ranges
RTDPt100 / -199.9 °C to 850.0 °C; Cu53 -210.0 °C to 210.0 °C; NI-120 -70.0 °C to 210.0 °C
Product
ApplicationsCooling towers, Pumps, Motors, Gear boxes, Blowers, ID/FD/PA Fans, Air compressors, Conveyors, Motor/Generator/ Turbine Monitoring and Protection, Compressor/Pump/DG set monitoring

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.

Related products