Hioki PW4001-05 Power Analyzer with D/A Output, Motor Analysis and External Power
- Brand
- Hioki
- Model number
- PW4001-05
- Category
- Power and Energy Meters
Portable 4-channel power analyzer with ±0.04% basic accuracy, DC and 0.1 Hz to 600 kHz bandwidth, CAN/CAN FD output and input, -20°C to 50°C operation. Adds D/A output, motor analysis and an external power source input.
Price and availability on request
Key features
- Basic accuracy: ±0.04%
- Operatable temperature range: -20°C to 50°C
- Frequency bandwidth: DC, 0.1 Hz to 600 kHz
- CAN / CAN FD output and input
- Auto phase shift correction for Hioki current sensors
Specifications
| Measurement lines | Single-phase 2-wire, single-phase 3-wire, three-phase 3-wire, three-phase 4-wire |
|---|---|
| Number of channels | 4 (4 voltage, 4 current, isolated between each channel) |
| Measurement frequency bandwidth | DC, 0.1 Hz to 600 kHz |
| Sampling | 16 bit, 2.5 MHz |
| Data update rate | 1 ms, 10 ms, 50 ms, 200 ms |
| Accuracy for power | DC, 50/60 Hz: ±0.03 % reading ± 0.01 % range / 50 kHz: ±0.40 % reading ± 0.10 % range |
| Voltage measurement range | 6 V, 15 V, 30 V, 60 V, 150 V, 300 V, 600 V, 1500 V |
| Current measurement range | 40 mA to 2000 A (depends on current sensor) |
| Measurement parameters | Voltage (U), current (I), active power (P), apparent power (S), reactive power (Q), power factor (λ), phase angle (φ), voltage frequency (fU), current frequency (fI), efficiency (η), loss (Loss), voltage ripple factor (Urf), current ripple factor (Irf), current integration (Ih), power integration (WP), voltage peak (Upk), current peak (Ipk) |
| Harmonic measurement | Wideband mode: max. analysis order of 500th |
| Waveform recording | Recording capacity: up to 5 mega-words for any waveform (current, voltage, motor) |
| Motor analysis (option) | Voltage, torque, RPM, frequency, slip, motor-power power spectrum analysis |
| Calculation function | Efficiency-loss calculations, user-defined formula, delta conversion, current sensor automatic phase shift compensation |
| External interface | USB flash drive, LAN, USB (function), external control, BNC sync., CAN or CAN FD |
| Power supplies | 100 V to 240 V AC, 10.5 V to 28 V DC |
| Dimensions and weight | 361 (W) × 176 (H) × 135 (D) mm (14.21 × 6.93 × 5.31 in.), 4.6 kg (162.3 oz.) |
| Contents | Startup guide ×1, power cord ×1, USB cable L1003 ×1, D-sub connector ×1 (PW4001-02, PW4001-05), DC power supply connector (PW4001-04, -05) |
|---|
| Order code | PW4001-05 (D/A output, Motor analysis, External power source) |
|---|
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Hioki CM3286-50
Hioki CM3286-50 AC Clamp Power Meter
Handheld clamp power meter for voltage, current, power, power factor, phase angle and frequency on live single-phase and balanced three-phase circuits, with four readings shown at once.
-
Enquire about Hioki PW3335
Hioki PW3335 Power Meter
Single-phase power meter with ±0.1% basic accuracy, 1 mA to 20 A ranges (30 A continuous), DC and 0.1 Hz to 100 kHz, SPECpower compatible. Built-in LAN and RS-232C.
-
Enquire about Hioki PW3335-01
Hioki PW3335-01 Power Meter with GP-IB
Single-phase power meter with ±0.1% basic accuracy, 1 mA to 20 A ranges (30 A continuous), DC and 0.1 Hz to 100 kHz, SPECpower compatible. Built-in LAN and GP-IB.
-
Enquire about Hioki PW3335-02
Hioki PW3335-02 Power Meter with D/A Output
Single-phase power meter with ±0.1% basic accuracy, 1 mA to 20 A ranges (30 A continuous), DC and 0.1 Hz to 100 kHz, SPECpower compatible. Built-in LAN, RS-232C and D/A output.
