Fluke 2052 Advanced Wire Tracer Kit
- Brand
- Fluke
- Model number
- 2052
- Category
- Cable Fault Locators
Advanced wire tracer kit for energized and de-energized wires, breaks and shorts, breakers and fuses; CAT IV 600 V.
Price and availability on request
Key features
- Locate energized and de-energized wires quickly and accurately in walls, ceilings, and floors
- Find breaks or opens and shorts, and identify breakers and fuses easily
- CAT IV 600 V safety rated
- Includes the i400 AC Current Clamp accessory for inducing a tracing signal on the cable when there is no access to bare conductors
Specifications
| Measurement category | CAT IV 600 V |
|---|---|
| Operating voltage | 600 V AC/DC |
| Display | TFT LCD 63 mm (2.5 in), 240 px x 320 px, backlit |
| Power supply | 4 x AA (alkaline); approx. 16 h |
| Measurement category | CAT IV 600 V |
|---|---|
| Operating frequency | Energized/Loop: 6.25 kHz; De-Energized: 32.768 kHz |
| Power supply | 8 x AA (alkaline); high/low mode approx. 25 h |
| Measurement category | CAT IV 600 V, CAT III 1000 V |
|---|---|
| Current range | 400 A |
| Basic accuracy | 2 % + 0.06 A (45 Hz to 400 Hz) |
| Maximum conductor size | 32 mm |
| Operating temperature | -20 °C to 50 °C |
|---|---|
| IP rating | IP 40 |
| Drop test | 1 m |
| Contents | Fluke 2052R Advanced Wire Tracer Receiver; Fluke 2000T Advanced Wire Tracer Transmitter; i400 AC Current Clamp; Fluke 2000ACC Test Lead Accessory Kit for 2052/2062; Premium hard carrying case; Batteries; Quick reference guide |
|---|
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
About the 2052
The Fluke 2052 traces energized and de-energized wires accurately in walls, ceilings and floors in residential, commercial and industrial settings up to CAT IV 600 V. It finds breaks, opens and shorts, identifies breakers and fuses, and includes an i400 AC current clamp for signal pickup.
Related products
-
Enquire about Fluke 2042
Fluke 2042 Cable Locator Set
General-purpose cable locator (transmitter and receiver) for live or dead cables in walls and underground.
-
Enquire about Kusam Meco KM-CFPL-620
Kusam Meco KM-CFPL-620 Cable Fault Pre-Locator (TDR) for Telecom and Signal Cables
TDR cable fault pre-locator for underground telecom and signal cables: open, short, earth, cross and poor-contact faults up to 8 km, ±1% × cable length, colour LCD, USB, with insulation and loop resistance tests.
-
Enquire about Metrel MI 2093
Metrel MI 2093 Line Tracer
Transmitter and receiver set for tracing hidden cables in walls, floors and ground, locating breaks, shorts, concealed sockets and fuses, and identifying a wire in a bundle; works on live or dead circuits, up to 2 m deep.
