Cautoni D200-2-1R5-00-C D200 Series VFD, 1.5 kW, Single Phase 220V Input
- Brand
- Cautoni
- Model number
- D200-2-1R5-00-C
- Category
- Variable Frequency Drives
Cautoni D200 variable frequency drive for single phase 220 V, 50 Hz supply: 1.5 kW motor in heavy duty, 2.2 kW in light duty. V/F and vector control, RS-485, built-in PID, IP20 ABS case.
Price and availability on request
Key features
- Advanced IGBT based drive technology starting from 0.5HP
- PCB conformal coating
- Detachable multi-functional display, extendable for panel mounted controls
- Compact, flame-retardant & impact resistance ABS enclosure
- V/F & open loop vector control
- High starting torque at low frequency
- Independent Air Duct Cooling Design to safeguard components
- Built-in RS485 Modbus communication & DC braking function
- Multi-function programmable I/O
- Wide operating temperature range
- Selectable Analog input & NPN/PNP
- Heavy duty continuous performance with all intelligent protection
- PID control functionality
- IP20 protection class
Specifications
| Input voltage | Single-phase 220V 50Hz |
|---|---|
| Input voltage tolerance | 220V power: 220±15% |
| Power | 1.5 kW |
| Output current (heavy load / light load) | 7.0/11 A |
| Applicable motor (heavy load / light load) | 1.5/2.2 kW |
| Control mode | V/F, Vector control |
|---|---|
| Display & status indicators | Four digital display; shows frequency, current, rotating speed, voltage, counter, temperature, forward/reverse status, fault, etc. |
| Communication control | RS-485 (Modbus) |
| Range | 0.1 to 2000.0 Hz |
|---|---|
| Accuracy | Digital type 0.1% (-10 to 60 °C); analog type 0.1% (45±10 °C) |
| Setting resolution | Digital type 0.1 Hz; analog type 1% of the maximum operating frequency |
| Output resolution | 0.1 Hz |
| Analog setting mode | External voltage 0-5V, 0-10V, 4-20mA, 0-20mA |
| Other functions | Three hopping frequencies (lower-frequency limit, startup frequency and stop frequency) can be set respectively |
| Acceleration/deceleration control | 4 optional acceleration/deceleration times (0.1-6500 seconds) |
|---|---|
| Torque control | Torque can be set rising with the maximum of 10.0%, and it can reach 150% when starting at 1.0Hz |
| Multi-function input terminal | 6-way programmable input; 8-segment speed control, program running, 4-segment acceleration/deceleration switching, UP, DOWN function, counter, external emergency stop, etc. |
| Multi-function output terminal | 1-way programmable output; running, zero speed, counter, external exception, program running and other indications as well as alarm |
| Other functions | Automatic voltage regulation (AVR), deceleration stop or free stop, DC brake, automatic reset and restart, frequency tracking, PLC program control, transverse control, draft control, automatic energy-saving running, carrier regulation (up to 20KHz) |
| Digital inputs | X1 to X5 and GND; NPN/PNP selected by jumper J1 |
|---|---|
| Analog input | AI1, 0-10V or 0-20mA (selected by jumper J2); 10V and 24V supply terminals |
| Analog output | AO, 0-10V / 0-20mA |
| Relay output | FA, FB, FC (multi-function relay output) |
| RS485 | S+, S- |
| Power | L1/L, L2/N (single phase models connect L, N); motor U, V, W; PE |
| Overload protection | Constant torque: 150% per minute; fans: 120% per minute |
|---|---|
| FUSE protection | In case of fuse, the motor stops running |
| Over voltage | 220V: DC voltage>390V |
| Low voltage | 220V: DC voltage<200V |
| Restart after transient stop | Restart after transient stop through frequency tracking mode |
| Stall prevention | Stall prevention during acceleration/deceleration |
| Short circuit of output terminal | Electronic circuit protection |
| Other functions | Overheating protection of radiating fin, reverse limit, direct startup after operating, fault reset, parameter locking, etc. |
| Operating temperature | -10 to 60 °C |
|---|---|
| Humidity | Relative humidity 0 to 95% (without condensation) |
| Vibration | Below 0.5G |
| Enclosure | Flame-retardant, high resistance and impact resistance ABS |
|---|---|
| Protection class | IP20 |
| Cooling | Fan cooling, independent air duct |
| PCB | Industrial grade conformal coating, SMT process |
| Overall (W x H x D) | 89.7 x 150 x 121.5 mm |
|---|---|
| Mounting holes | 76 x 136 mm, 2 x Φ5 |
| Series | D200 |
|---|---|
| Applications | Woodworking & textile machinery, packaging and labelling machines, printing and engraving machines, food processing equipment, pumps, fans, ceramic machinery, pharmaceutical machines, compressors, boilers |
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Cautoni D200-2-004-00-C
Cautoni D200-2-004-00-C D200 Series VFD, 3.7 kW, Single Phase 220V Input
Cautoni D200 variable frequency drive for single phase 220 V, 50 Hz supply: 3.7 kW motor in heavy duty, 5.5 kW in light duty. V/F and vector control, RS-485, built-in PID, IP20 ABS case.
-
Enquire about Cautoni D200-2-0R4-00-C
Cautoni D200-2-0R4-00-C D200 Series VFD, 0.4 kW, Single Phase 220V Input
Cautoni D200 variable frequency drive for single phase 220 V, 50 Hz supply: 0.4 kW motor in heavy duty, 0.75 kW in light duty. V/F and vector control, RS-485, built-in PID, IP20 ABS case.
-
Enquire about Cautoni D200-2-0R7-00-C
Cautoni D200-2-0R7-00-C D200 Series VFD, 0.75 kW, Single Phase 220V Input
Cautoni D200 variable frequency drive for single phase 220 V, 50 Hz supply: 0.75 kW motor in heavy duty, 1.5 kW in light duty. V/F and vector control, RS-485, built-in PID, IP20 ABS case.
-
Enquire about Cautoni D200-2-2R2-00-C
Cautoni D200-2-2R2-00-C D200 Series VFD, 2.2 kW, Single Phase 220V Input
Cautoni D200 variable frequency drive for single phase 220 V, 50 Hz supply: 2.2 kW motor in heavy duty, 3.7 kW in light duty. V/F and vector control, RS-485, built-in PID, IP20 ABS case.
