54, Ezra Street , Kolkata - 700001 , West Bengal, IndiaMonday to Saturday, 10:30 am to 6:30 pm

Industrial Supply Syndicate Kolkata, since 1977 Send an enquiry
Autonics TR1D-14RN Independent Single Display PID Temperature Controller TR1D-14RN

Autonics TR1D-14RN Independent Single Display PID Temperature Controller TR1D-14RN

Model number
TR1D-14RN

Autonics TR1D-14RN independent single display PID temperature controller (TR1D Series): 100 - 240 VAC 50/60 Hz supply, 7 segment (red), 4-digit display. Order code note: 0(ENG).

Price and availability on request

Request a quote

Sent with the product details: Autonics TR1D-14RN Independent Single Display PID Temperature Controller TR1D-14RN.

A phone number or an email address is needed, so we can reply.

We use these details only to reply to your enquiry. See our privacy notice.

Key features

  • Compact, space-saving design with 22.5 mm width size
  • 50 ms high-speed sampling and ± 0.3 % display accuracy
  • Simultaneous heating / cooling and automatic / manual control function
  • Switch between current output and SSR drive output
  • Easy mount on DIN rails
  • RS485 communication output model available; Protocol: Modbus RTU or ASCII; Communication speed: up to 115,200 bps
  • Parameter setting via PC (USB or RS485 communication); Comprehensive device management software (DAQMaster) provided
  • Heater disconnect alarm function (CT input) * Current transformer (CT) sold separately: CSTC-E80LN, CSTC-E200LN, CSTS-E80PP
  • Screen protection function

Specifications

Model
SeriesTR1D Series
Order code description0(ENG)
Specifications
Power supply100 - 240 VAC 50/60 Hz
Permissible voltage range90 to 110% of rated voltage
Power consumption≤ 8 VA
Sampling period50, 100, 250 ms
Input specificationRefer to Autonics website
Option input CT input• 0.0-50.0 A (primary current measurement range) • CT ratio: 1/1,000, • Measurement accuracy: ±5% F.S. ±1digit
Control output Relay250 VAC 3 A 1a
Control output SSR12 VDC ±3 V, ≤ 20 mA
Control output CurrentDC 4-20 mA or DC 0-20 mA (parameter), Load: ≤ 500 Ω
Option output AlarmAL1, AL2: 250 VAC 3 A 1a
Option output TransmissionDC4-20 mA (Load resistance: ≤ 500 Ω, Output accuracy: ±0.3% F.S.)
Option output RS485 comm.Modbus RTU / ASCII
Display type7 segment (red), 4-digit
Control typeON/OFF, P, PI, PD, PID Control
HysteresisControl output: 1 to 100 ℃/℉ (0.1 to 100.0 ℃/℉) Alarm output: 1 to 100 ℃/℉ (0.1 to 50.0 ℃/℉)
Proportional band (P)0.1 to 999.9 ℃
Integral time (I)0 to 9,999 sec
Derivative time (D)0 to 9,999 sec
Control cycle (T)Relay output: 0.5 to 120.0 sec, SSR drive output: 0.5 to 120.0 sec
Manual reset0.0 to 100.0%
Dielectric strengthBetween the charging part and the case: 3,000 VAC 50/60 Hz for 1 min
Vibration0.75 mm amplitude at frequency of 5 to 55Hz in each X, Y, Z direction for 2 hours
Relay life cycle MechanicalOUT1/2, AL1/2: ≥ 5,000,000 operations
Relay life cycle ElectricalOUT1/2, AL1/2: ≥ 100,000 operations (resistance load: 250 VAC 5 A)
Insulation resistance≥ 100 MΩ (500 VDC megger)
Insulation typeDouble insulation or reinforced insulation (dielectric strength between the power part and the case: 3 kV)
Noise immunitySquare shaped noise (pulse width: 1 ㎲) by noise simulator ±2 kV R-phase, S-phase
Memory retention≈ 10 years (non-volatile semiconductor memory type)
Ambient temperature-10 to 50 ℃, storage: -20 to 60 ℃ (no freezing or condensation)
Ambient humidity35 to 85%RH, storage: 35 to 85%RH (no freezing or condensation)
Unit weight (packaged)≈ 123.5 g (≈ 194.5 g)
Comm. protocolModbus RTU / ASCII

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.

Related products