Autonics TCN4H-24R Dual Display PID Temperature Controller TCN4H-24R
- Brand
- Autonics
- Model number
- TCN4H-24R
- Category
- Temperature Controllers
Autonics TCN4H-24R dual display PID temperature controller (TCN Series): R 100 - 240 VAC 50/60 Hz supply, 7 Segment (red, green), LED type display. Order code note: 0(ENG).
Price and availability on request
Key features
- Dual digital display (PV / SV)
- 100 ms high-speed sampling rate and ± 0.5 % display accuracy
- Switch between relay output and SSR drive output
- SSR drive output (SSRP function) control options: ON / OFF control, cycle control, phase control
- Compact design with large display panels for easier reading
- Connector plug types offer easier wiring and maintenance (TCN4S- -P)
Specifications
| Series | TCN Series |
|---|---|
| Order code description | 0(ENG) |
| Catalogue model group | TCN4□-24□-□ |
| Power supply | R 100 - 240 VAC 50/60 Hz |
|---|---|
| Permissible voltage range | 90 to 110 % of rated voltage |
| Power consumption | ≤ 5 VA |
| Sampling period | 100 ms |
| Input specification | Refer to Autonics website |
| Control output Relay | 250 VAC 3A, 30 VDC 3A, 1a |
| Control output SSR | 12 VDC ±2 V, ≤ 20 mA |
| Alarm output | 250 VAC 1 A 1a |
| Display type | 7 Segment (red, green), LED type |
| Control type Heating, Cooling | ON/OFF, P, PI, PD, PID Control |
| Hysteresis | 1 to 100 (0.1 to 50.0) ℃/℉ |
| Proportional band (P) | 0.1 to 999.9 ℃/℉ |
| Integral time (I) | 0 to 9,999 sec |
| Derivative time (D) | 0 to 9,999 sec |
| Control cycle (T) | 0.5 to 120.0 sec |
| Manual reset | 0.0 to 100.0% |
| Relay life cycle Mechanical | ≥ 5,000,000 operations |
| Relay life cycle Electrical | OUT1/2: ≥ 200,000 operations (load resistance: 250 VAC 3 A ) AL1/2: ≥ 300,000 operations (load resistance: 250 VAC 1 A ) |
| Dielectric strength | Between the charging part and the case: 2,000 VAC 50/60 Hz for 1 min |
| Vibration | 0.75 mm amplitude at frequency of 5 to 55 Hz in each X, Y, Z direction for 2 hours |
| Insulation resistance | ≥ 100 MΩ (500 VDC megger) |
| Noise immunity | ±2 kV square shaped noise (pulse width: 1 ㎲) by noise simulator R-phase, S-phase |
| Memory retention | ≈ 10 years (non-volatile semiconductor memory type) |
| Ambient temperature | -10 to 50 ℃, storage: -20 to 60 ℃ (no freezing or condensation) |
| Ambient humidity | 35 to 85%RH, storage: 35 to 85%RH (no freezing or condensation) |
| Insulation type | Mark: , double or reinforced insulation (dielectric strength between the measuring input part and the power part: 2 kV) |
| Unit weight (packaged) | • TCN4S: ≈ 100 g (≈ 147 g) • TCN4M: ≈ 133 g (≈ 203 g) • TCN4H: ≈ 124 g (≈ 194 g) • TCN4L: ≈ 179 g (≈ 275 g) |
| Sold separately | Terminal protection cover: RSA / RMA / RHA / RLA-COVER |
|---|
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Autonics KPN5300-200
Autonics KPN5300-200 Bar Graph Temperature Controller KPN5300-200
Autonics KPN5300-200 bar graph temperature controller (KPN Series): 100 - 240 VAC 50/60 Hz supply, IP65 (front panel, IEC standards). Order code note: OUT1,RS485.
-
Enquire about Autonics KPN5313-030
Autonics KPN5313-030 Bar Graph Temperature Controller KPN5313-030
Autonics KPN5313-030 bar graph temperature controller (KPN Series): 100 - 240 VAC 50/60 Hz supply, IP65 (front panel, IEC standards). Order code note: OUT1CUR,SSR,OUT2Relay*PV+RSV.
-
Enquire about Autonics KPN5500-000
Autonics KPN5500-000 Bar Graph Temperature Controller KPN5500-000
Autonics KPN5500-000 bar graph temperature controller (KPN Series): 100 - 240 VAC 50/60 Hz supply, IP65 (front panel, IEC standards). Order code note: OUT1(Relay,SSR,Cur).
-
Enquire about Autonics KPN5500-030
Autonics KPN5500-030 Bar Graph Temperature Controller KPN5500-030
Autonics KPN5500-030 bar graph temperature controller (KPN Series): 100 - 240 VAC 50/60 Hz supply, IP65 (front panel, IEC standards). Order code note: OUT1,PV+R-SV.
