Autonics TAL-B4RKCC Analog Non-Indication Type PID Temperature Controller TAL-B4RKCC
- Brand
- Autonics
- Model number
- TAL-B4RKCC
- Category
- Temperature Controllers
Autonics TAL-B4RKCC analog Non-Indication type PID temperature controller (TA Series): 100 - 240 VAC 50/60 Hz supply.
Price and availability on request
Key features
- Auto-tuning PID temperature control
- PID and ON / OFF control: toggle via external switch
- Deviation indicators (green, red LED)
- Control output indicator (red LED)
- Stop control output function using analog dial
- Sensor disconnect display function
- Built-in microprocessor
Specifications
| Series | TA Series |
|---|
| Power supply | 100 - 240 VAC 50/60 Hz |
|---|---|
| Permissible voltage range | 90 to 110 % of rated voltage |
| Power consumption | ≤ 4 VA |
| Sampling period | 100 ms |
| Input specification | • RTD: DPt100Ω (allowable line resistance per a wire: ≤5 Ω) • Thermocouple: K (CA), J (IC) |
| Control output Relay | 250 VAC 3 A, 30 VDC 1 A 1c |
| Control output SSR | 12 VDC ±2 V, ≤ 20 mA |
| Display type | PV deviation, Error display (red, green), LED type |
| Setting method | Front dial |
| Setting accuracy | • At room temperature (23 ℃ ±5 ℃) Over 100 ℃ model: F.S.±2%, below 100 ℃ model: F.S.±3% • Out of room temperature range Over 100 ℃ model: F.S.±3%, below 100 ℃ model: F.S.±4% |
| Control type ON / OFF | Hysteresis: 2℃ (fixed) |
| Control type PID Control | Control cycle: relay output 20 sec / SSR drive output 2 sec |
| Relay life cycle Mechanical | ≥ 10,000,000 operations (18,000 operations/time) |
| Relay life cycle Electrical | ≥ 100,000 operations (900 operations/time) |
| Dielectric strength | Between the charging part and the case: 2,000 VAC 50/60 Hz for 1 min |
| Vibration | 0.75 mm amplitude at frequency of 5 to 55 Hz in each X, Y, Z direction for 2 hours |
| Insulation resistance | ≥ 100 MΩ (500 VDC megger) |
| Noise immunity | Square shaped noise (pulse width: 1 ㎲) by noise simulator ±2 kV R-phase, S-phase |
| Memory retention | ≈ 10 years (non-volatile semiconductor memory type) |
| Ambient temperature | -10 to 50 ℃, storage: -20 to 60 ℃ (no freezing or condensation) |
| Ambient humidity | 35 to 85%RH, storage: 35 to 85%RH (no freezing or condensation) |
| Insulation type | Double or reinforced insulation ( dielectric strength between the measuring input part and the power part: 2 kV) |
| Unit weight (packaged) | • TAS: ≈ 69 g (≈ 107 g) • TAM: ≈ 109 g (≈ 171 g) • TAL: ≈ 147 g (≈ 232 g) |
| Sold separately | 8-pin controller socket: PG-08, PS-08(N); Terminal protection cover: RMA / RLA-COVER |
|---|
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Autonics KPN5300-200
Autonics KPN5300-200 Bar Graph Temperature Controller KPN5300-200
Autonics KPN5300-200 bar graph temperature controller (KPN Series): 100 - 240 VAC 50/60 Hz supply, IP65 (front panel, IEC standards). Order code note: OUT1,RS485.
-
Enquire about Autonics KPN5313-030
Autonics KPN5313-030 Bar Graph Temperature Controller KPN5313-030
Autonics KPN5313-030 bar graph temperature controller (KPN Series): 100 - 240 VAC 50/60 Hz supply, IP65 (front panel, IEC standards). Order code note: OUT1CUR,SSR,OUT2Relay*PV+RSV.
-
Enquire about Autonics KPN5500-000
Autonics KPN5500-000 Bar Graph Temperature Controller KPN5500-000
Autonics KPN5500-000 bar graph temperature controller (KPN Series): 100 - 240 VAC 50/60 Hz supply, IP65 (front panel, IEC standards). Order code note: OUT1(Relay,SSR,Cur).
-
Enquire about Autonics KPN5500-030
Autonics KPN5500-030 Bar Graph Temperature Controller KPN5500-030
Autonics KPN5500-030 bar graph temperature controller (KPN Series): 100 - 240 VAC 50/60 Hz supply, IP65 (front panel, IEC standards). Order code note: OUT1,PV+R-SV.
