Autonics PSQ-BC01U-R1/8 Dual Display Type Pressure Sensor PSQ-BC01U-R1/8
- Brand
- Autonics
- Model number
- PSQ-BC01U-R1/8
- Category
- Pressure Sensors & Transmitters
Autonics PSQ-BC01U-R1/8 dual display type pressure sensor (PSQ Series): 1 / 2,000 resolution, NPN or PNP open collector output, -100.0 to 100.0 kPa / -100 to 1,000 kPa model, ≤ 100 mA, IP65 (IEC standard). Order code note: 12-24VDC.
Price and availability on request
Key features
- Pressure measurement of any gas, liquid or oil [fluid type] except substances which may corrode stainless steel 316L
- Dual display for simultaneous display of process value (PV) and setpoint value (SV)
- Secondary (SV) display: setpoint value, pressure unit, or display-OFF
- Switch between NPN and PNP open collector output via parameter configuration
- Measurement range: -100.0 to 100.0 kPa /; 100 to 1000 kPa (Pneumatic type: compound pressure, Fluid type: sealed gauge pressure)
- Analog output: voltage (1 - 5 VDC ), current (DC 4 - 20 mA)
- Copy parameter settings function
- External input: Auto-Shift, Remote, Hold (PSQ- C U- models only)
- Forced output control mode for device testing and inspection
- Display resolution: 0.1 kPa / 1 kPa (by model)
Specifications
| Series | PSQ Series |
|---|---|
| Order code description | 12-24VDC |
| Catalogue model group | PSQ-BC□ |
| Applicable medium | Fluid type (non-corrosive gas and fluid that do not corrode stainless steel 316L) |
|---|---|
| Pressure type | Sealed gauge pressure |
| Rated pressure range | -100.0 to 100.0 kPa / -100 to 1,000 kPa model |
| Display and setting pressure range | Different by rated pressure range; -100.0 to 100.0 kPa model: -101.3 to 110.0 kPa; -100 to 1,000 kPa model: -101 to 1,100 kPa |
| display type | PV / SV display part: 12 segment LCD, 4digit |
| Display accuracy | -10 to 0 ℃: ≤ ±1% F.S., 0 to 50 ℃: ≤ ±0.5% F.S. |
| Min. display unit | Different by rated pressure range; -100.0 to 100.0 kPa model: 0.1 kPa; -100 to 1,000 kPa model: 1 kPa |
| min. display interval | Different by pressure unit |
| Max. pressure range | Different by rated pressure range; -100.0 to 100.0 kPa model: Rated pressure × 3 |
| Connection | Cable type |
| Cable | Ø 4 mm, 5 core, 3 m |
| Wire | AWG 24 (0.08 mm, 40 seam) insulator diameter: Ø 1 mm |
| Material | Front case: PC, back case: PA6, pressure port: SUS316L |
| Protection structure | IP65 (IEC standard) |
| Unit weight (packaged) | ≈125 g (≈ 210 g) |
| Power supply | 12 - 24 VDC (ripple P-P: ≤ 10%) |
| Allowable voltage range | 90 to 110% of rated voltage |
| Current consumption | ≤ 50 mA (analog output model: ≤ 70 mA) |
| Control output | NPN or PNP open collector output |
| Load voltage | ≤ 30 VDC |
| Load current | ≤ 100 mA |
| Residual voltage | ≤ 2 VDC |
| Hysteresis | Different by output operation mode (parameter) |
| Repeat error | ±0.2% F.S. ±min. display interval |
| Response time | 2.5 to 5,000 ms (parameter) ; 50 ms |
| Protection circuit | Output short over current protection circuit |
| Insulation resistance | ≥ 50 MΩ (500 VDC megger) |
| Dielectric strength | Between the charging part and the case: 1,000 VAC 50 / 60 Hz for 1 min |
| Vibration | 1.5mm amplitude at frequency of 10 to 55Hz in each X, Y, Z direction for 2 hours |
| Ambient temperature | -10 to 50 ℃, storage: -20 to 60 ℃ (no freezing or condensation) |
| Ambient humidity | 30 to 80%RH, storage: 30 to 80%RH (no freezing or condensation) |
| External input | Auto shift - Remote zero - Hold (parameter) |
| ON / OFF voltage input | ON voltage: ≤ 0.4 VDC , OFF voltage: 5-Vin or open, input impedance: ≈ 100 kΩ |
| Resolution | 1 / 2,000 |
| Option output | Analog voltage - Analog current output (parameter) |
| Analog voltage output | 1 - 5 VDC ±2.5% F.S., output impedance: ≈ 240 Ω |
| Analog current output | DC4 - 20 mA ±2.5% F.S., output impedance: ≈ 100 kΩ |
| Linearity | ≤ ±1% F.S. |
| Sold separately | Integrated installation set: Front cover (PSO-P, Panel bracket (PSO-B; Separate installation set: Front cover (PSO-P, Front / rear panel bracket set (PSO-B; M5 gender (PSO-Z Only for pneumatic type model |
|---|
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Autonics KT-302HA-0610
Autonics KT-302HA-0610 Display Type Pressure Transmitter KT-302HA-0610
Autonics KT-302HA-0610 display type pressure transmitter (KT-302H Series): 9 - 45 VDC supply, IP67 (IEC standard). Order code note: ABS,0~3.5MPa G3/8*STS316,BRACKET.
-
Enquire about Autonics KT-302HS-0110
Autonics KT-302HS-0110 Display Type Pressure Transmitter KT-302HS-0110
Autonics KT-302HS-0110 display type pressure transmitter (KT-302H Series): 9 - 45 VDC supply, IP67 (IEC standard). Order code note: 0~35kPa G3/8*STS316,BRACKET.
-
Enquire about Autonics KT-302HS-0510
Autonics KT-302HS-0510 Display Type Pressure Transmitter KT-302HS-0510
Autonics KT-302HS-0510 display type pressure transmitter (KT-302H Series): 9 - 45 VDC supply, IP67 (IEC standard). Order code note: 0~2MPa G3/8*STS316,BRACKET.
-
Enquire about Autonics KT-302HS-0910
Autonics KT-302HS-0910 Display Type Pressure Transmitter KT-302HS-0910
Autonics KT-302HS-0910 display type pressure transmitter (KT-302H Series): 9 - 45 VDC supply, IP67 (IEC standard). Order code note: 0~35MPa G3/8*STS316,BRACKET.
