Autonics PSB-C01C-M5 Display Type Pressure Sensor PSB-C01C-M5
- Brand
- Autonics
- Model number
- PSB-C01C-M5
- Category
- Pressure Sensors & Transmitters
Autonics PSB-C01C-M5 display type pressure sensor (PSB Series): 1/200 resolution, 7 segment LED, 3 ½ digit display, -100.0 to 100.0 kPa, ≤ 100 mA, IP40 (IEC standard). Order code note: 12-24VDC(METAL).
Price and availability on request
Key features
- High accuracy digital pressure sensor
- Bright red LED display (character height: 9.5 mm)
- High display resolution, negative pressure 0.1 kPa / standard pressure 0.1 kPa, 1 kPa / compound pressure 0.2 kPa
- Unit conversion function; negative, compound pressure: kPa, kgf/cm², bar, psi, mmHg, mmH O, inHg 2; standard pressure: kPa, kgf/cm², bar, psi
- Various output modes: hysteresis mode, automatic sensitivity adjustment mode, independent 2-point output mode, window comparison output mode
- Chattering prevention function (response time: 2.5 ms, 5 ms, 100 ms, 500 ms)
- Analog output (1 - 5 VDC ) scale function
- Zero-point adjustment function
- Peak value and low value hold function
- Built-in reverse polarity protection circuit, overcurrent protection circuit
Specifications
| Series | PSB Series |
|---|---|
| Order code description | 12-24VDC(METAL) |
| Catalogue model group | PSB-C01□ |
| Pressure type | Gauge pressure |
|---|---|
| Applicable medium | Air, Non-corrosive gas |
| Pressure | Compound |
| Min display interval | 2-digit |
| Rated pressure range | -100.0 to 100.0 kPa |
| Display & setting pressure range | -101.2 to 110.0 kPa |
| Display type | 7 segment LED, 3 ½ digit |
| Display accuracy | -10 to 0 ℃: ≤ ±2% F.S., 0 to 50 ℃: ≤ ±1% F.S. |
| Max. pressure | Rated pressure ×2 |
| Connection type | Cable type / Connector type model |
| Cable | • Cable type: Ø 4 mm, 5-core, 2 m • Connector type: 5-core, 3 m |
| Wire spec. | AWG 24 (0.08 mm, 40-core), insulator diameter: Ø 1 mm |
| Material | Case, Pressure port, Cover: IXEF |
| Guaranteed parameter write life | 100,000 times |
| Protection structure | IP40 (IEC standard) |
| Unit weight (packaged) | ≈ 70 g (≈ 160 g) |
| Power supply | 12 - 24 VDC ±10% (ripple P-P: ≤ 10%) |
| Current consumption | ≤ 50 mA |
| Control output | NPN open collector output / PNP open collector output model |
| Load voltage | ≤ 30 VDC |
| Load current | ≤ 100 mA |
| Residual voltage | NPN: ≤ 1 VDC , PNP: ≤ 2 VDCT |
| Hysteresis | Negative / Static: 1-digit (psi unit: 2-digit) Compound: 2-digit |
| Repeat error | Negative / Static: ±0.2% F.S. ±1digit Compound: ±0.2% F.S.±2digits |
| Response time | 2.5, 5, 100, 500 ms |
| Protection circuit | Output short over-current protection circuit |
| Vibration | 1.5 mm amplitude at frequency of 10 to 55 Hz in each X, Y, Z direction for 2 hours |
| Ambient temperature | -10 to 50 ℃, storage: -20 to 60 ℃ (no freezing or condensation) |
| Ambient humidity | 35 to 85%RH, storage: 35 to 85%RH (no freezing or condensation) |
| Analog output | Voltage (1 - 5 VDC ±2% F.S) |
| Output impedance | 1 kΩ |
| Linearity | ≤ ±2% F.S |
| Zero-point | ≤ 1 VDC ±2% F.S. |
| Span | ≤ 4 VDC ±2% F.S. |
| Resolution | 1/200 |
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Autonics KT-302HA-0610
Autonics KT-302HA-0610 Display Type Pressure Transmitter KT-302HA-0610
Autonics KT-302HA-0610 display type pressure transmitter (KT-302H Series): 9 - 45 VDC supply, IP67 (IEC standard). Order code note: ABS,0~3.5MPa G3/8*STS316,BRACKET.
-
Enquire about Autonics KT-302HS-0110
Autonics KT-302HS-0110 Display Type Pressure Transmitter KT-302HS-0110
Autonics KT-302HS-0110 display type pressure transmitter (KT-302H Series): 9 - 45 VDC supply, IP67 (IEC standard). Order code note: 0~35kPa G3/8*STS316,BRACKET.
-
Enquire about Autonics KT-302HS-0510
Autonics KT-302HS-0510 Display Type Pressure Transmitter KT-302HS-0510
Autonics KT-302HS-0510 display type pressure transmitter (KT-302H Series): 9 - 45 VDC supply, IP67 (IEC standard). Order code note: 0~2MPa G3/8*STS316,BRACKET.
-
Enquire about Autonics KT-302HS-0910
Autonics KT-302HS-0910 Display Type Pressure Transmitter KT-302HS-0910
Autonics KT-302HS-0910 display type pressure transmitter (KT-302H Series): 9 - 45 VDC supply, IP67 (IEC standard). Order code note: 0~35MPa G3/8*STS316,BRACKET.
