Autonics PSAN-LC01CV-R1/8 Display Type Pressure Sensor PSAN-LC01CV-R1/8

Model number
PSAN-LC01CV-R1/8

Autonics PSAN-LC01CV-R1/8 display type pressure sensor (PSAN Series): 7 Segment LED, 4 ½ digit display, 0.0 to 100.0 kPa, ≤ 100 mA. Order code note: 12-24VDC (MALE).

Price and availability on request

Request a quote

Sent with the product details: Autonics PSAN-LC01CV-R1/8 Display Type Pressure Sensor PSAN-LC01CV-R1/8.

A phone number or an email address is needed, so we can reply.

We use these details only to reply to your enquiry. See our privacy notice.

Key features

  • Pressure measurement of any gas, liquid or oil (except substances which may corrode stainless steel 304 / 316L)
  • Auto shift function: with change in the original pressure, the external input adjusts the determined level to match the change in pressure (only available in models with auto shift/hold function)
  • Hold function: hold current display value or control output
  • Forced output control mode for device testing and maintenance
  • One-touch connector type for easy wiring and maintenance
  • Zero-point adjustment function, peak value monitoring function, chattering prevention function

Specifications

Model
SeriesPSAN Series
Order code description12-24VDC (MALE)
Catalogue model groupPSAN-□01C□-□
Specifications
Pressure TypePneumatic type model: Gauge pressure Fluid type model: Gauge pressure or sealed gauge pressure
PressureStatic
Min display unit0.1 kPa
Rated pressure range0.0 to 100.0 kPa
Display & setting pressure range-5.0 to 110.0 kPa
Display type7 Segment LED, 4 ½ digit
Display accuracy-10 to 0 ℃: ≤ ±1% F.S., 0 to 50 ℃: ≤ ±0.5% F.S.
Max. pressureRated pressure ×2
Applicable mediumPneumatic type (air, non-corrosive gas)
Connection typeConnector type
CableØ 4 mm, 5-core, 2 m
Wire spec.AWG24 (0.08 mm, 40-core), insulator diameter: Ø 1 mm
MaterialFront case: PC Back case: (back port) PC / (bottom port) PBT+GF15% Pressure port: Brass-nickel plated
Protection structureConnector type: IP40 (IEC standard)
Unit weight (packaged)Back port: ≈ 80 g (≈ 165 g) Bottom port: ≈ 85 g (≈ 170 g)
Power supply12 - 24 VDC (ripple P-P: ≤ 10%)
Allowable voltage range90 to 110% of rated voltage
Current consumption≤ 50 mA
Control outputNPN open collector output / PNP open collector output model
Load voltage≤ 30 VDC
Load current≤ 100 mA
Residual voltageNPN: ≤ 1 VDC , PNP: ≤ 2 VDC
HysteresisAccording to output operation mode
Repeat error±0.2% F.S. ±min display interval
Response time2.5, 5, 100, 500, 1000 ms ; 50 ms
Protection circuitOutput short over-current protection circuit
Insulation resistance≥ 50 MΩ (500 VDC megger)
Dielectric strengthBetween the charging part and the case: 1,000 VAC 50 / 60 Hz for 1 min
Vibration1.5 mm amplitude at frequency of 10 to 55Hz in each X, Y, Z direction for 2 hours
Ambient temperature-10 to 50 ℃, Storage: -20 to 60 ℃ (no freezing or condensation)
Ambient humidity30 to 80%RH, Storage: 30 to 80%RH (no freezing or condensation)
Analog outputVoltage (1 - 5 VDC ±2% F.S)
Output impedance1 kΩ
Linearity≤ ±1% F.S
Zero-point≤ 1 VDC ±2% F.S.
Span≤ 4 VDC ±2% F.S.
Resolution1/1000 or 1/2000 (different by pressure type and display unit)
Accessories
Sold separatelyFront cover (PSO-P, Panel bracket (PSO-B02 / B; Pneumatic type: M5 gender (PSO-Z

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.