Autonics PSAN-B1PH-9/16-18UNF Display Type Pressure Sensor PSAN-B1PH-9/16-18UNF

Model number
PSAN-B1PH-9/16-18UNF

Autonics PSAN-B1PH-9/16-18UNF display type pressure sensor (PSAN Series): 7 Segment LED, 4 ½ digit display, 0 to 1,000 kPa, ≤ 100 mA. Order code note: 12-24VDC.

Price and availability on request

Request a quote

Sent with the product details: Autonics PSAN-B1PH-9/16-18UNF Display Type Pressure Sensor PSAN-B1PH-9/16-18UNF.

A phone number or an email address is needed, so we can reply.

We use these details only to reply to your enquiry. See our privacy notice.

Key features

  • Pressure measurement of any gas, liquid or oil (except substances which may corrode stainless steel 304 / 316L)
  • Auto shift function: with change in the original pressure, the external input adjusts the determined level to match the change in pressure (only available in models with auto shift/hold function)
  • Hold function: hold current display value or control output
  • Forced output control mode for device testing and maintenance
  • One-touch connector type for easy wiring and maintenance
  • Zero-point adjustment function, peak value monitoring function, chattering prevention function

Specifications

Model
SeriesPSAN Series
Order code description12-24VDC
Catalogue model groupPSAN-□1□
Specifications
Pressure TypePneumatic type model: Gauge pressure Fluid type model: Gauge pressure or sealed gauge pressure
PressureStatic
Min display unit1 kPa
Rated pressure range0 to 1,000 kPa
Display & setting pressure range-101.3 to 1,100 kPa
Display type7 Segment LED, 4 ½ digit
Display accuracy-10 to 0 ℃: ≤ ±1% F.S., 0 to 50 ℃: ≤ ±0.5% F.S.
Max. pressure• Pneumatic type: Rated pressure ×1.5 • Fluid type: Rated pressure ×2
Applicable mediumFluid type (non-corrosive gas and fluid that do not corrode stainless steel 316L)
Connection typeCable type / connector type
CableConnector type: Ø 4 mm, 5-core, 2 m Cable type: Ø 4 mm, 5-core, 3 m
Wire spec.AWG24 (0.08 mm, 40-core), insulator diameter: Ø 1 mm
MaterialFront case: PC Back case: PA6 Pressure port: SUS304/SUS316L
Protection structureConnector type: IP40 (IEC standard) Cable type: IP65 (IEC standard)
Unit weight (packaged)Connector type: ≈ 88 g (≈ 173 g) Cable type: ≈ 90 g (≈ 167 g)
Power supply12 - 24 VDC (ripple P-P: ≤ 10%)
Allowable voltage range90 to 110% of rated voltage
Current consumption≤ 50 mA
Control outputNPN open collector output / PNP open collector output model
Load voltage≤ 30 VDC
Load current≤ 100 mA
Residual voltageNPN: ≤ 1 VDC , PNP: ≤ 2 VDC
HysteresisAccording to output operation mode
Repeat error±0.2% F.S. ±min display interval
Response time2.5, 5, 100, 500, 1000 ms ; 70 ms
Protection circuitOutput short over-current protection circuit
Insulation resistance≥ 50 MΩ (500 VDC megger)
Dielectric strengthBetween the charging part and the case: 1,000 VAC 50 / 60 Hz for 1 min
Vibration1.5 mm amplitude at frequency of 10 to 55Hz in each X, Y, Z direction for 2 hours
Ambient temperature-10 to 50 ℃, Storage: -20 to 60 ℃ (no freezing or condensation)
Ambient humidity30 to 80%RH, Storage: 30 to 80%RH (no freezing or condensation)
Analog outputCurrent (DC 4 - 20mA ±2% F.S)
Linearity≤ ±1% F.S
Zero-point≤ DC 4 mA ±2% F.S.
Span≤ DC 16 mA ±2% F.S.
Resolution1/1000 or 1/2000 (different by pressure type and display unit)
Accessories
Sold separatelyFront cover (PSO-P, Panel bracket (PSO-B02 / B; Pneumatic type: M5 gender (PSO-Z

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.