Autonics PA10-WP Sensor Controller PA10-WP

Autonics PA10-WP sensor controller (PA10 Series): OUT1, OUT2 output, 100 - 240 VAC ± 10 % 50 / 60 Hz supply. Order code note: AC100-240V.

Price and availability on request

High-speed output response
DIN rail or panel mount installation
PA10-U features; 13 operation modes (DIP switches); Flip-flop mode for level control; Timer operation mode
Wide range power supply: 100 - 240 VAC 50 / 60 Hz

Specifications
Power supply	100 - 240 VAC ± 10 % 50 / 60 Hz
Power consumption	≤ 10 VA (12 VDC / 200 mA load)
Sensor supply power	12 VDC ± 10 % ≈ 200 mA
Input logic	Individual
Input method	NPN / PNP input model
No-voltage input	Short-circuit impedance: ≤ 300 Ω Short-circuit residual voltage: ≤ 2 V Open-circuit impedance: ≥ 100 kΩ
Voltage input	Input impedance: 5.6 kΩ [H]: 5 - 30 VDC [L]: 0 - 2 VDC
Output	OUT1, OUT2
Contact output	250 VAC 3 A resistance load
Output response time	Relay output: ≤ 10 ms, Transistor output: ≤ 0.05 ms
Relay life cycle	Mechanical: Min. 10,000,000 times Electrical: Min. 100,000 times (250 VAC 3 A resistance load)
Dielectric strength	2000 VAC 50 / 60 Hz for 1 min
Insulation resistance	≥ 100 MΩ (500 VDC megger)
Ambient temperature	-10 to 55 ℃, storage: -25 to 60 ℃ (no freezing or condensation)
Ambient humidity	35 to 85 %RH, storage: 35 to 85 %RH (no freezing or condensation)
Unit weight	≈ 160 g

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.