Autonics KPN5511-030 Bar Graph Temperature Controller KPN5511-030
- Brand
- Autonics
- Model number
- KPN5511-030
- Category
- Temperature Controllers
Autonics KPN5511-030 bar graph temperature controller (KPN Series): 100 - 240 VAC 50/60 Hz supply, IP65 (front panel, IEC standards). Order code note: OUT1,2CUR,SSR*PV+RSV.
Price and availability on request
Key features
- High speed sampling of 50 ms and ± 0.3 % display accuracy
- Enable to check control output operation amount by adopting bar graph
- Simultaneous heating / cooling control and automatic / manual control for high performance control
- Selection function of current output or SSR drive output
- Parameter setting available via PC
- Communication converter sold separately: SCM-US (USB / Serial converter), SCM-38I (RS232C / RS485 converter), SCM-US48I (USB / RS485 converter)
- Multi-SV (Max. 4) function (select via digital input terminal)
- Heater break alarm
- CT sold separately
- Multi input / multi range
Specifications
| Series | KPN Series |
|---|---|
| Order code description | OUT1,2CUR,SSR*PV+RSV |
| Power supply | 100 - 240 VAC 50/60 Hz |
|---|---|
| Permissible voltage range | 90 to 110 % of rated voltage |
| Power consumption | ≤ 15 VA |
| Sampling period | 50 ms |
| Input specification | Refer to Autonics website |
| Option input CT input | • 0.0-50.0 A (primary current measurement range) • CT ratio: 1/1,000 |
| Option input Remote SV | 1 - 5 VDC or 4 - 20 mA (Current Input: External resistance 250 Ω) |
| Option input Digital input | • Contact - ON: ≤ 2 kΩ, OFF: ≥ 90 kΩ • Non contact - residual voltage ≤ 1.0 V, leakage current ≤ 0.1 mA |
| Control output Relay | 250 VAC 5 A 1a |
| Control output SSR | 11 VDC ±2 V, ≤ 20 mA |
| Control output Current | DC 4-20 mA or DC 0-20 mA (parameter), load resistance: ≤ 500 Ω |
| Alarm output Relay | 250 VAC 3 A 1a |
| Option output Transmission | DC 4 - 20 mA ( load resistance: ≤ 500 Ω, output accuracy: ±0.3% F.S. ±1-digit) |
| Option output RS485 Comm. | Modbus RTU |
| Display type | 7 segment (red, green), control output bar graph (red, green), LED type |
| Control type Heating, Cooling | ON/OFF, P, PI, PD, PID Control |
| Hysteresis | • Thermocouple, RTD: 1 to 100 (0.1 to 100.0) ℃/℉ • Analog: 1 to 100 digit |
| Proportional band (P) | 0.1 to 999.9 ℃/℉ (0.1 to 999.9%) |
| Integral time (I) | 0 to 9,999 sec |
| Derivative time (D) | 0 to 9,999 sec |
| Control cycle (T) | • 0.1 to 120.0 sec [relay output model] • 1.0 to 120.0 sec [SSR drive output model] |
| Manual reset | 0.0 to 100.0% |
| Relay life cycle Mechanical | ≥ 10,000,000 operations |
| Relay life cycle Electrical | ≥ 100,000 operations (load resistance: 250 VAC 3 A) |
| Dielectric strength | Between the charging part and the case: 3,000 VAC ~ 50/60 Hz for 1 minute |
| Vibration | 0.75 mm amplitude at frequency of 5 to 55 Hz in each X, Y, Z direction for 2 hours |
| Insulation resistance | ≥ 100 MΩ (500 VDC megger) |
| Noise immunity | ±2 kV square shaped noise (pulse width 1 ㎲) by noise simulator R-phase, S-phase |
| Memory retention | ≈ 10 years (non-volatile semiconductor memory type) |
| Ambient temperature | -10 to 50 ℃, storage: -20 to 60 ℃ (no freezing or condensation) |
| Ambient humidity | 35 to 85%RH, storage: 35 to 85%RH (no freezing or condensation) |
| Protection structure | IP65 (front panel, IEC standards) |
| Insulation type | Double or reinforced insulation ( dielectric strength between the measuring input part and the power part: 2 kV) |
| Accessory | Bracket |
| Unit weight (packaged) | • KPN52 - : ≈ 160 g (≈ 230 g) • KPN53 - : ≈ 160 g (≈ 230 g) • KPN55 - : ≈ 220 g (≈ 316 g) |
| Comm. protocol | Modbus RTU |
| Sold separately | Terminal protection cover: RHA / RLA-COVER; Communication Converter: SCM-US / SCM-38I / SCM-US48I / SCM-WF48; Current transformer (CT) |
|---|
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Autonics KPN5300-200
Autonics KPN5300-200 Bar Graph Temperature Controller KPN5300-200
Autonics KPN5300-200 bar graph temperature controller (KPN Series): 100 - 240 VAC 50/60 Hz supply, IP65 (front panel, IEC standards). Order code note: OUT1,RS485.
-
Enquire about Autonics KPN5313-030
Autonics KPN5313-030 Bar Graph Temperature Controller KPN5313-030
Autonics KPN5313-030 bar graph temperature controller (KPN Series): 100 - 240 VAC 50/60 Hz supply, IP65 (front panel, IEC standards). Order code note: OUT1CUR,SSR,OUT2Relay*PV+RSV.
-
Enquire about Autonics KPN5500-000
Autonics KPN5500-000 Bar Graph Temperature Controller KPN5500-000
Autonics KPN5500-000 bar graph temperature controller (KPN Series): 100 - 240 VAC 50/60 Hz supply, IP65 (front panel, IEC standards). Order code note: OUT1(Relay,SSR,Cur).
-
Enquire about Autonics KPN5500-030
Autonics KPN5500-030 Bar Graph Temperature Controller KPN5500-030
Autonics KPN5500-030 bar graph temperature controller (KPN Series): 100 - 240 VAC 50/60 Hz supply, IP65 (front panel, IEC standards). Order code note: OUT1,PV+R-SV.
