Autonics ENC-1-4-T-24 Wheel Type Incremental Rotary Encoder ENC-1-4-T-24

Autonics ENC-1-4-T-24 wheel type incremental rotary encoder (ENC Series): Totem pole output, IP50 (IEC standard). Order code note: 12-24VDC.

Price and availability on request

Wheel type encoders ideal for measuring length or speed of continuously moving objects
Output waveform of measured distance is proportional to International Weights and Measures (meters / inches)
Power supply: 5 VDC ± 5%, 12 - 24 VDC ± 5%

Specifications
Min. measuring unit [/pulse]	1 mm / 1 cm / 1 m / 0.01 yd / 0.1 yd / 1 yd model
Control output	Totem pole output
Output phase	A, B
Inflow current	≤ 30 mA
Residual voltage	≤ 0.4 VDC
Outflow current	≤ 10 mA
Output voltage (5 VDC )	≥ (power supply -2.0) VDC
Output voltage (12 - 24 VDC )	≥ (power supply -3.0) VDC
Response speed	≤ 1 ㎲
Max. response freq.	180 kHz
Max. allowable revolution	5,000 rpm
Starting torque	Dependent on the coefficient of friction
Unit weight	≈ 494 g
Power supply	5 VDC ± 5% (ripple P-P: ≤ 5%) / 12 - 24 VDC ± 5% (ripple P-P: ≤ 5%) model
Current consumption	≤ 80 mA (no load)
Insulation resistance	≥ 100 MΩ (500 VDC megger)
Dielectric strength	Between the charging part and the case: 750 VAC 50 / 60 Hz for 1 min.
Vibration	1 mm double amplitude at frequency 10 to 55 Hz in each X, Y, Z direction for 2 hours
Shock	75 G
Ambient temp.	≲ -10 to 70 ℃, storage: -25 to 85 ℃ (no freezing or condensation)
Ambient humi.	35 to 85%RH, storage: 35 to 90%RH (no freezing or condensation)
Protection rating	IP50 (IEC standard)
Connection	Axial cable type / Cable connector type model
Cable spec.	Ø 5 mm, 4-wire, shield cable cable type: 2 m, cable connector type: 250 mm
Wire spec.	AWG24 (0.08 mm, 40-core), insulator diameter: Ø 1 mm
Connector spec.	M17 6-pin plug type

Accessories
Sold separately	M17 connector cable: CID6S-

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.