Autonics E58S9.25-2048-10-A-5-S 58 mm Diameter Sine Wave Incremental Rotary Encoder E58S9.25-2048-10-A-5-S

Model number
E58S9.25-2048-10-A-5-S

Autonics E58S9.25-2048-10-A-5-S 58 mm diameter sine wave incremental rotary encoder (E58-A Series): ≤ 10 mA, 2,048 PPR resolution, Analog sine wave OP Amp. output, IP50 (IEC standard). Order code note: NW(7M).

Price and availability on request

Request a quote

Sent with the product details: Autonics E58S9.25-2048-10-A-5-S 58 mm Diameter Sine Wave Incremental Rotary Encoder E58S9.25-2048-10-A-5-S.

A phone number or an email address is needed, so we can reply.

We use these details only to reply to your enquiry. See our privacy notice.

Key features

  • Tapered shaft
  • Analog sine wave operational amplifier (OP Amp.) output
  • Power supply: 5 VDC ± 5%

Specifications

Model
SeriesE58-A Series
Order code descriptionNW(7M)
Catalogue model groupE58S9.25-2048-10-A-5-□
Specifications
Resolution2,048 PPR
Control outputAnalog sine wave OP Amp. output
Output phaseA, A, B, B, Z, Z, C, C, D, D
Output current≤ 10 mA
Output voltage VP-P0.5 ± 0.1 VDC
DC OFFSET Vref2.5 ± 0.3 VDC
Max. response frequency200 kHz
Max. allowable revolution6,000 rpm
ShaftTaper shaft Ø 9.25 mm, Taper 1 : 10
Starting torque≤ 0.0098 N m
Inertia moment≤ 15 g·cm2 (1.5 × 10-6 kg·m2)
Allowable shaft loadRadial: ≤ 10 kgf, Thrust: ≤ 2.5 kgf
Unit weight (packaged)≈ 930 g (≈ 1.02 kg)
Power supply5 VDC ± 5% (ripple P-P: ≤ 5%)
Current consumption≤ 120 mA (no load)
Insulation resistance≥ 100 MΩ (500 VDC megger)
Dielectric strengthBetween the charging part and the case: 750 VAC 50 / 60 Hz for 1 min.
Vibration1 mm double amplitude at frequency 10 to 55 Hz in each X, Y, Z direction for 2 hours
Shock100 G
Ambient temp.≲ -20 to 100 ℃, storage: -25 to 100 ℃ (no freezing or condensation)
Ambient humi.35 to 85%RH, storage: 35 to 90%RH (no freezing or condensation)
Protection ratingIP50 (IEC standard)
ConnectionAxial / Radial cable type model
Cable spec.Ø 6 mm, 17-wire, 9 m, shield cable
Wire spec.AWG28 (0.08 mm, 17-core), insulator diameter: Ø 0.8 mm

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.