| Resolution | 300 PPR |
|---|
| Control output | Voltage output |
|---|
| Output phase | A, B, Z |
|---|
| Residual voltage | ≤ 0.4 VDC |
|---|
| Outflow current | ≤ 10 mA |
|---|
| Response speed | ≤ 1 ㎲ |
|---|
| Max. response freq. | 300 kHz |
|---|
| Max. allowable revolution | 5,000 rpm |
|---|
| Connection | Axial connector type |
|---|
| Starting torque | ≤ 0.078 N m |
|---|
| Inertia moment | ≤ 400 g·cm2 (4 × 10-5 kg·m2) |
|---|
| Allowable shaft load | Radial: ≤ 10 kgf, Thrust: ≤ 2.5 kgf |
|---|
| Unit weight (packaged) | ≈ 180 g (≈ 268 g) |
|---|
| Power supply | 12 - 24 VDC ± 5% (ripple P-P: ≤ 5%) |
|---|
| Current consumption | Totempole, NPN open collector, Voltage output: ≤ 80 mA (no load) Line driver output: ≤ 50 mA (no load) |
|---|
| Insulation resistance | ≥ 100 MΩ (500 VDC megger) |
|---|
| Dielectric strength | Between the charging part and the case: 750 VAC 50 / 60 Hz for 1 min. |
|---|
| Vibration | 1 mm double amplitude at frequency 10 to 55 Hz in each X, Y, Z direction for 2 hours |
|---|
| Shock | 75 G |
|---|
| Ambient temp. | ≲ -10 to 70 ℃, storage: -25 to 85 ℃ (no freezing or condensation) |
|---|
| Ambient humi. | 35 to 85%RH, storage: 35 to 90%RH (no freezing or condensation) |
|---|
| Protection rating | Axial cable type / cable connector type: IP50 (IEC standard) Axial / Radial connector type: IP64 (IEC standard) |
|---|
| Cable spec. | Ø 5 mm, 5-wire (Line driver output: 8-wire), shield cable cable type: 2 m, cable connector type: 250 mm |
|---|
| Wire spec. | AWG24 (0.08 mm, 40-core), insulator diameter: Ø 1 mm |
|---|
| Connector spec. | Totempole, NPN open collector, Voltage output: M17 6-pin plug type Line driver output: M17 9-pin plug type |