Autonics E40HB8-400-6-L-5 40 mm Diameter Incremental Rotary Encoder E40HB8-400-6-L-5
- Brand
- Autonics
- Model number
- E40HB8-400-6-L-5
- Category
- Rotary Encoders
Autonics E40HB8-400-6-L-5 40 mm diameter incremental rotary encoder (E40 Series): 400 PPR resolution, Line driver output, IP50 (IEC standard). Order code note: 5VDC.
Price and availability on request
Key features
- Ø 40 mm housing incremental rotary encoders
- Shaft, hollow shaft, blind hollow shaft models available
- Easy installation in tight or limited spaces
- Low shaft moment of inertia
- Various resolutions: 1 to 5000 pulses per revolution
- Various control output options
- Power supply: 5 VDC ± 5%, 12 - 24 VDC ± 5%
Specifications
| Series | E40 Series |
|---|---|
| Order code description | 5VDC |
| Catalogue model group | E40□-□-□-L□-□-□ |
| Resolution | 400 PPR |
|---|---|
| Control output | Line driver output |
| Output phase | A, A, B, B, Z, Z |
| Inflow current | ≤ 20 mA |
| Residual voltage | ≤ 0.5 VDC |
| Outflow current | ≤ -20 mA |
| Output voltage (5 VDC ) | ≥ 2.5 VDC |
| Output voltage (12 - 24 VDC ) | ≥ (power supply -3.0) VDC |
| Response speed | ≤ 0.5 ㎲ |
| Max. response freq. | 300 kHz |
| Max. allowable revolution | 5,000 rpm |
| Starting torque | E40S: ≤ 0.004 N m E40H, E40HB: ≤ 0.005 N m |
| Inertia moment | ≤ 40 g·cm2 (4 × 10-6 kg·m2) |
| Allowable shaft load | Radial: ≤ 2 kgf, Thrust: ≤ 1 kgf |
| Unit weight | ≈ 120 g |
| Power supply | 5 VDC ± 5% (ripple P-P: ≤ 5%) |
| Current consumption | Totempole, NPN open collector, Voltage output: ≤ 80 mA (no load) Line driver output: ≤ 50 mA (no load) |
| Insulation resistance | ≥ 100 MΩ (500 VDC megger) |
| Dielectric strength | Between all charging part and case: 750 VAC 50 / 60 Hz for 1 minute |
| Vibration | 1 mm double amplitude at frequency 10 to 55 Hz in each X, Y, Z direction for 2 hours |
| Shock | 50 G |
| Ambient temp. | ≲ -10 to 70 ℃, storage: -25 to 85 ℃ (no freezing or condensation) |
| Ambient humi. | 35 to 85%RH, storage: 35 to 90%RH (no freezing or condensation) |
| Protection rating | IP50 (IEC standard) |
| Connection | Radial cable type / cable connector type model |
| Cable spec. | Ø 5 mm, 5-wire (Line driver output: 8-wire), shield cable cable type: 2 m, cable connector type: 250 mm |
| Wire spec. | AWG24 (0.08 mm, 40-core), insulator diameter: Ø 1 mm |
| Connector spec. | Totempole, NPN open collector, Voltage output: M17 6-pin plug type Line driver output: M17 9-pin plug type |
| Sold separately | M17 connector cable: CID6S- , CID9S- Shaft Type Hollow Shaft Type |
|---|
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Autonics E100H35-10000-3-T-24
Autonics E100H35-10000-3-T-24 100 mm Diameter Incremental Rotary Encoder E100H35-10000-3-T-24
Autonics E100H35-10000-3-T-24 100 mm diameter incremental rotary encoder (E100 Series): 10000 PPR resolution, Totem pole output, IP50 (IEC standard). Order code note: 12-24VDC.
-
Enquire about Autonics E100H35-10000-3-T-5
Autonics E100H35-10000-3-T-5 100 mm Diameter Incremental Rotary Encoder E100H35-10000-3-T-5
Autonics E100H35-10000-3-T-5 100 mm diameter incremental rotary encoder (E100 Series): 10000 PPR resolution, Totem pole output, IP50 (IEC standard). Order code note: 5VDC.
-
Enquire about Autonics E100H35-10000-6-L-5
Autonics E100H35-10000-6-L-5 100 mm Diameter Incremental Rotary Encoder E100H35-10000-6-L-5
Autonics E100H35-10000-6-L-5 100 mm diameter incremental rotary encoder (E100 Series): 10000 PPR resolution, Line driver output, IP50 (IEC standard). Order code note: 5VDC.
-
Enquire about Autonics E100H35-1024-3-T-24
Autonics E100H35-1024-3-T-24 100 mm Diameter Incremental Rotary Encoder E100H35-1024-3-T-24
Autonics E100H35-1024-3-T-24 100 mm diameter incremental rotary encoder (E100 Series): 1024 PPR resolution, Totem pole output, IP50 (IEC standard). Order code note: 12-24VDC.
