Autonics BD-A1 Laser Displacement Sensor (Sensor Head) BD-A1
- Brand
- Autonics
- Model number
- BD-A1
- Category
- Distance & Displacement Sensors
Autonics BD-A1 laser displacement sensor (Sensor head) (BD Series): 11 segment (red, green), 6-digit, LED display. Order code note: 10-30VDC.
Price and availability on request
Key features
- Reference distance :; Diffuse reflective type:; 30 / 65 / 100 / 300 / 600 mm; Regular reflective type: 30 / 65 / 100 mm
- Easy maintenance with detachable sensor head / amplifier unit
- Maximum resolution: 1㎛ (vary by model)
- Accurate measurement with minimal influence from target color or material (diffuse reflective type)
- Stable measurement of reflective or transparent material (regular reflective type)
- Interconnection of up to 8 sensor amplifier units: Mutual interference prevention function and auto channelsorting
Specifications
| Series | BD Series |
|---|---|
| Order code description | 10-30VDC |
| Catalogue model group | BD-A1□ |
| Supported amplifier | Amplifier unit (BD-A1) |
|---|---|
| Power supply | From the amplifier unit (BD-A1) ; 10 - 30 VDC ±10% (when connecting BD-C Series communication converter, 12-30 VDC ) |
| Operation indicator | Power indicator (red), Laser emission indicator (green), NEAR/FAR indicator (green) |
| Insulation resistance | ≥ 20 MΩ (500 VDC megger) |
| Noise immunity | Square shaped noise by noise simulator (pulse width: 1㎲) ±500V ; Square shaped noise by noise simulator (pulse width: 1 ㎲) ±500 V |
| Dielectric strength | Between the charging part and the case: 1,000 VAC 50/60 Hz for 1 minute |
| Vibration | 1.5 mm amplitude at frequency of 10 to 55Hz in each X, Y, Z direction for 2 hours ; 1.5 mm amplitude at frequency of 10 to 55 Hz in each X, Y, Z direction for 2 hours |
| Shock | 300 m/s2 (≈ 30 G) in each X, Y, Z direction for 3 times ; 300 m/s2 (approx. 30 G) in each X, Y, Z direction for 3 times |
| Ambient illumination | ≤ 10,000 ㏓ incandescent lamp |
| Ambient temperature | -10 to 50 ℃, Storage: -15 to 60 ℃ (no freezing or condensation) |
| Ambient humidity | 35 ~ 85%RH, Storage: 35 ~ 85%RH (no freezing or condensation) ; ≤ 85%RH, Storage: ≤ 85%RH (no freezing or condensation) |
| Protection structure | IP67 (IEC Standards, except connector of extension cable) ; IP40 (IEC standard) |
| Power consumption | ≤ 2,800 mW (30 VDC ) |
| Control Input | Hold trigger, Output reset, Laser OFF, Zero-point adjustment, BANK-A/B combinations : No-voltage input |
| Judgment output (HIGH/GO/LOW) | NPN or PNP open collector output (load current: ≤ 100 mA) |
| Alarm output | NPN or PNP open collector output (load current: ≤ 100 mA) |
| Analog output | Voltage: -5 - 5 V, 0 - 5 V, 1 - 5 V (resistance: 100 Ω, ± 0.05% F.S., at 10 V) Current: 4 - 20 mA 4 - 20 mA (load resistance: ≤ 350 Ω, ± 0.2% F.S., at 16 mA) |
| Residual voltage | NPN: ≤ 1.5 V, PNP: ≤ 2.5 V |
| Protection circuit | Reverse polarity protection circuit, output over current (short-circuit) protection circuit |
| Response Time | 0.33 / 0.5 / 1 / 2 / 5 ms |
| Min. display unit | [BD-030 / 065 / 100 / 030R / 065R / 100R] 1 ㎛ [BD-300 / 600] 10 ㎛ |
| Display type | 11 segment (red, green), 6-digit, LED |
| Display range | [BD-030 / 065 / 100 / 030R / 065R / 100R] ± 99.999 to ± 99 mm (4-step paramete set) [BD-300 / 600] ± 999.99 to ± 999 mm (3-step parameter set) |
| Display period | ≈ 100 ms |
| Material | Case: PC, Cover: PC, cable: PVC |
| Supported sensor head | Sensor head (BD- ) |
| Supported comunication converter | Communication converter (BD-C) |
| Unit weight (packaged) | ≈ 126 g (≈ 228 g) |
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Autonics BD-030
Autonics BD-030 Laser Displacement Sensor (Sensor Head) BD-030
Autonics BD-030 laser displacement sensor (Sensor head) (BD Series): 1 ㎛ resolution, ≤ 300 ㎼ output, From the amplifier unit (BD-A1) supply. Order code note: V2-10-30VDC.
-
Enquire about Autonics BD-065
Autonics BD-065 Laser Displacement Sensor (Sensor Head) BD-065
Autonics BD-065 laser displacement sensor (Sensor head) (BD Series): 2 ㎛ resolution, ≤ 1 mW output, From the amplifier unit (BD-A1) supply. Order code note: V2-10-30VDC.
-
Enquire about Autonics BD-100
Autonics BD-100 Laser Displacement Sensor (Sensor Head) BD-100
Autonics BD-100 laser displacement sensor (Sensor head) (BD Series): 4 ㎛ resolution, ≤ 1 mW output, From the amplifier unit (BD-A1) supply. Order code note: V2-10-30VDC.
-
Enquire about Autonics BD-100R
Autonics BD-100R Laser Displacement Sensor (Sensor Head) BD-100R
Autonics BD-100R laser displacement sensor (Sensor head) (BD Series): 4 ㎛ resolution, ≤ 300 ㎼ ; ≤ 1 mW output, From the amplifier unit (BD-A1) supply. Order code note: V1-10-30VDC.