Test & Measuring Instruments
Portable and bench instruments for electricians, maintenance teams, test labs and quality departments: from multimeters and clamp meters to insulation, earth, power quality and environmental testers.
All products in Test & Measuring Instruments
-
Enquire about Lutron PCO-350
Lutron PCO-350 Pen Type Carbon Monoxide (CO) Meter
Pen type CO meter with an electrochemical sensor reading 0 to 1,000 ppm, plus temperature, with a CO alarm and data hold.
-
Enquire about Kusam Meco KM 2807CSE
Kusam Meco KM 2807CSE 6000-Count True RMS Multimeter with VFD and EF Detection
Practical 6000-count true RMS multimeter with VFD voltage and frequency, Hi / Lo EF detection (NCV and single pole), hold-alert, BeepLit™ continuity and diode; CAT III 1000 V / CAT IV 600 V.
-
Enquire about Lutron PDO-519
Lutron PDO-519 Pen Type Dissolved Oxygen Meter, IP67
All-in-one pen dissolved oxygen meter for 0 to 20.0 mg/L with polarographic probe, ATC, max/min recall and IP67 protection.
-
Enquire about Kusam Meco KM 2820EL
Kusam Meco KM 2820EL Digital ELCB / Earth Leakage Tester
Microprocessor ELCB tester for 100 – 450 V L-E: checks trip point (sensitivity) and trip time, trip current 0 – 999 mA with 1 mA resolution, timer to 99.999 s, phase angle 0° / 180°; CAT III 450 V.
-
Enquire about Lutron PDO-520
Lutron PDO-520 Pen Type Dissolved Oxygen Meter with Separate Probe
Pen dissolved oxygen meter with a separate polarographic probe on a 4 m cable, auto calibration, ATC and IP65 protection.
-
Enquire about Kusam Meco KM 3001
Kusam Meco KM 3001 2000 A AC/DC True RMS Clamp Meter for Solar (1500 V DC)
2000 A AC / DC true RMS clamp meter with a 1500 V DC range for solar PV: 55 mm jaw, VFD, EF detection, temperature, 5 ms crest capture, optional USB; CAT IV 1000 V / CAT III 1500 V DC.
-
Enquire about Lutron PDT-2250
Lutron PDT-2250 RPM Controller / Monitor
Panel tachometer and controller for 10 to 99,999 RPM, m/min or ft/min, with control and alarm relays and adjustable pulses per round.
-
Enquire about Kusam Meco KM 3022B
Kusam Meco KM 3022B 25 MHz 2-Channel Arbitrary Waveform Generator
2-channel arbitrary waveform generator, 25 MHz sine, 250 MSa/s, 16-bit, 2M memory depth, over 160 built-in waveforms, wide modulation set, 80 MHz frequency counter, 4.3-inch colour screen, USB.
-
Enquire about Lutron PE-03
Lutron PE-03 pH Electrode, Combination Type, BNC
Combination pH electrode for pH 1 to 13, 12.3 mm diameter and 160 mm long, for Lutron pH meters with a BNC input.
-
Enquire about Kusam Meco KM 3060
Kusam Meco KM 3060 1000 A AC Digital Clamp Meter
1000 A AC clamp meter (average sensing) with 40 mm jaw and 2000-count backlit display, plus 1000 V DC / 750 V AC, frequency and resistance; CAT II 600 V.
-
Enquire about Lutron PE-03K7
Lutron PE-03K7 pH Electrode and ATC Temperature Probe Kit
Kit of a pH electrode (pH 1 to 13) and an ATC temperature probe for the PH-207, PH-208, PH-221, PH-230SD and multi-parameter water meters.
-
Enquire about Kusam Meco KM 3060-T
Kusam Meco KM 3060-T 1000 A AC True RMS Clamp Meter
1000 A AC true RMS clamp meter with 40 mm jaw and 6000-count backlit display, plus 1000 V DC / 750 V AC, resistance to 60 MΩ, capacitance to 100 mF, frequency and temperature; CAT II 600 V.
-
Enquire about Lutron PE-06HDA
Lutron PE-06HDA Spear Tip pH Electrode for Meat and Cheese
Spear tip pH electrode with a durable glass spear in a rugged epoxy body, for piercing samples such as meat, sausage and cheese; pH 1 to 13.
-
Enquire about Kusam Meco KM 3560
Kusam Meco KM 3560 5½-Digit Bench True RMS Digital Multimeter
5½-digit (119,999-count) bench true RMS multimeter with 4.3-inch colour touch screen, 1 µV resolution, 500 readings / s, histogram and trend charts, front and rear inputs, USB, RS-232 and LAN.
-
Enquire about Lutron PE-11
Lutron PE-11 pH Electrode, Slim 10 mm
Slim combination pH electrode, 10 mm diameter and 130 mm long, measuring pH 1 to 13 (typically 0 to 14).
-
Enquire about Kusam Meco KM 3961
Kusam Meco KM 3961 Digital Vibration Meter with PC Interface
Vibration meter for velocity (0.01 – 400 mm/s true RMS), acceleration, displacement, RPM and frequency, with 10 kHz bearing condition mode, headphone output and RS232C PC interface.
-
Enquire about Lutron PE-12
Lutron PE-12 pH Electrode for Pen pH Meters PH-222 and PH-223
Replacement combination electrode with built-in temperature sensor for the PH-222 and PH-223 pen pH meters, pH 1 to 13, 5 to 60 °C.
-
Enquire about Kusam Meco KM 4000
Kusam Meco KM 4000 1000 A AC True RMS Clamp Meter
1000 A AC true RMS clamp meter with 42 mm jaw: inrush, LoZ and low-pass voltage, NCV, flashlight, capacitance to 60 mF and temperature to 1000 °C; reads to 3000 A with the optional KM-CCT3K flex probe.
-
Enquire about Lutron PE-21
Lutron PE-21 Industrial In-line pH Electrode
Heavy duty in-line pH electrode for continuous monitoring in plants and labs: pH 0 to 14, up to 95 °C, 3/4" NPT thread and 5 m cable.
-
Enquire about Kusam Meco KM 4002
Kusam Meco KM 4002 1000 A AC/DC True RMS Clamp Meter
1000 A AC / DC true RMS clamp meter with 42 mm jaw and Hall-effect sensor: inrush, LoZ and low-pass voltage, NCV, flashlight, temperature to 1000 °C; reads to 3000 A with the optional KM-CCT3K flex probe.
-
Enquire about Lutron PH-04
Lutron PH-04 pH 4.00 Buffer Solution
Standard pH 4.00 buffer solution for calibrating pH meters and electrodes.
-
Enquire about Kusam Meco KM 4234ER
Kusam Meco KM 4234ER Digital Earth Resistance Tester (4 Wire)
Microprocessor-controlled 2, 3 and 4-wire earth tester with a 0 – 2 Ω low range up to 2 kΩ, earth voltage to 300 V AC, automatic C and P spike check and 2-line display; CAT IV 300 V.
-
Enquire about Lutron PH-04A
Lutron PH-04A pH 4.00 Buffer Solution for Pen pH Meters
Standard pH 4.00 buffer solution packed for the PH-222 and PH-223 pen pH meters.
-
Enquire about Kusam Meco KM 4235ER
Kusam Meco KM 4235ER Digital Earth Resistance and Soil Resistivity Tester (4 Wire)
Microprocessor-controlled 2, 3 and 4-wire earth tester: earth resistance to 2000 Ω with 0.01 Ω resolution, soil resistivity to 628 kΩ·m, earth voltage to 300 V AC, automatic spike check and 200-reading memory; CAT IV 300 V.
