Skip to content

Temperature & Process

Thermometers, thermal imagers, calibrators and data loggers for temperature checks, process instruments and recording measurements over time.

All products in Temperature & Process

Fluke 709 Precision mA Loop Calibrator

Precision mA loop calibrator with 0.01% of reading accuracy, quick-set knob and built-in 250 Ω HART resistor.

Enquire about Fluke 709
Autonics KRN100-08000-00-0S 100 mm Hybrid Recorder KRN100-08000-00-0S

Autonics KRN100-08000-00-0S 100 mm hybrid recorder (KRN100 Series): 320 × 120 pixel resolution, 100-240 VAC 50 / 60 Hz supply, IP50 (front part, IEC standard). Order code note: 8CH*KRN-UI2 CARDx4.

Enquire about Autonics KRN100-08000-00-0S
Kusam Meco KM-CAL-905 Multifunction Process Calibrator with Pressure

Multifunction process calibrator, ±0.02%, sources and measures V, mA, Ω, frequency, thermocouples and RTDs at the same time, 24 V loop, pressure with optional modules, dual 5-digit backlit display.

Enquire about Kusam Meco KM-CAL-905
HTC Instruments LX-10A Mini Lux Meter

Pocket lux meter with lux / foot-candle ranges up to 200,000 lux, 320 – 730 nm, for fluorescent, metal halide, sodium and incandescent light, plus temperature and humidity.

Enquire about HTC Instruments LX-10A
Lutron AQ-9812SD Air Quality Meter, CO2 / O2 / Humidity / Temperature, SD Logger

Multi-probe air quality meter for CO2 (NDIR, 0 to 10,000 ppm), oxygen in air (0 to 30 %), humidity, dew point and temperature, recording two probes at once to an SD card.

Enquire about Lutron AQ-9812SD
Fluke 712B RTD Calibrator

Single-function RTD calibrator that measures and simulates 13 RTD types and resistance, and measures 4 to 20 mA.

Enquire about Fluke 712B
Autonics KRN100-08000-01-0S 100 mm Hybrid Recorder KRN100-08000-01-0S

Autonics KRN100-08000-01-0S 100 mm hybrid recorder (KRN100 Series): 320 × 120 pixel resolution, 100-240 VAC 50 / 60 Hz supply, IP50 (front part, IEC standard). Order code note: 8CH*RS485/Ethernet/USB.

Enquire about Autonics KRN100-08000-01-0S
Kusam Meco KM-CAL-905A Multifunction Process Calibrator

Multifunction process calibrator, ±0.02%, sources and measures V, mA, Ω, frequency, thermocouples and RTDs at the same time, 24 V loop (no pressure function), dual 5-digit backlit display.

Enquire about Kusam Meco KM-CAL-905A
HTC Instruments LX-104 Data Logging Lux Meter

Data logging lux meter, 400 to 400,000 lux in four ranges, CIE photopic response, peak hold for 10 µs light pulses, 99-value memory, 16,000-record logger and USB.

Enquire about HTC Instruments LX-104
Lutron AQ-9901SD Air Quality Meter, CO2 / CO / O2 / Humidity, SD Logger

Air quality meter that takes up to three probes for CO2 (0 to 4,000 ppm), CO (0 to 1,000 ppm), oxygen and humidity/temperature, with real-time SD card logging.

Enquire about Lutron AQ-9901SD
Fluke 715 Volt/mA Loop Calibrator

Compact volt/mA calibrator, 0.01% accuracy and 1 µA resolution; sources and measures mA loops and voltage.

Enquire about Fluke 715
Autonics KRN100-12000-01-0S 100 mm Hybrid Recorder KRN100-12000-01-0S

Autonics KRN100-12000-01-0S 100 mm hybrid recorder (KRN100 Series): 320 × 120 pixel resolution, 100-240 VAC 50 / 60 Hz supply, IP50 (front part, IEC standard). Order code note: 12CH*RS485/Ethernet/USB.

Enquire about Autonics KRN100-12000-01-0S
Kusam Meco KM-CAL-906 Temperature Calibrator, Source and Measure (mV, Ω, TC, RTD)

Temperature calibrator with ±0.02% accuracy: measures and sources mV, Ω, 10 thermocouple types and Pt / Cu RTDs, dual backlit display (5 digits measure, 6 digits source).

Enquire about Kusam Meco KM-CAL-906
HTC Instruments MS-02 Mini Wood and Building Material Moisture Meter

Pocket pin-type moisture meter for wood and building materials, 7 material settings, three-colour backlight (wet / moderate / dry), plus ambient temperature and humidity.

Enquire about HTC Instruments MS-02
Lutron AQ-9912SD Air Quality Meter, CO2 10,000 ppm / CO / O2 / Humidity, SD Logger

Air quality meter for CO2 up to 10,000 ppm, CO up to 1,000 ppm, oxygen and humidity/temperature, logging three probes at a time to an SD card.

Enquire about Lutron AQ-9912SD
Fluke 717 30G Pressure Calibrator, -12 to 30 psi

Pressure calibrator with internal sensor, -12 to 30 psi (-850 mbar to 2 bar), 0.05% FS; measures mA with 24 V loop power.

Enquire about Fluke 717 30G
Autonics KRN100-CARD 100 mm Hybrid Recorder KRN100-CARD

Autonics KRN100-CARD 100 mm hybrid recorder (KRN100 Series): 320 × 120 pixel resolution, 100-240 VAC 50 / 60 Hz supply, IP50 (front part, IEC standard). Order code note: KRN-24V3(24VDC OUTPUT CARD).

Enquire about Autonics KRN100-CARD
Kusam Meco KM-CAL-907 V / mA Process Calibrator, Source and Measure

V / mA process calibrator with ±0.02% accuracy: sources V, mA, frequency and pulses, measures V, mA and frequency, 24 V loop power, optional pressure function.

Enquire about Kusam Meco KM-CAL-907
HTC Instruments MT-4 550 °C Industrial Infrared Pyrometer

Non-contact infrared pyrometer, −50 °C to 550 °C (−58 °F to 1022 °F), 12:1 distance-to-spot ratio, laser pointer, colour LCD with backlight, max / min record.

Enquire about HTC Instruments MT-4
Lutron AQ-9918SD One-probe Air Quality Meter, CO2 / O2 / Humidity / Temperature

Air quality meter whose single probe measures CO2 (0 to 10,000 ppm), oxygen, humidity, dew point and temperature, showing all readings on one screen and logging to SD card.

Enquire about Lutron AQ-9918SD
Fluke 724 Temperature Calibrator

Temperature calibrator that sources and measures 10 thermocouple and 7 RTD types, volts and ohms, and measures 4-20 mA loops.

Enquire about Fluke 724
Autonics KRN1000-0401-0S LCD Touchscreen Paperless Recorder KRN1000-0401-0S

Autonics KRN1000-0401-0S LCD touchscreen paperless recorder (KRN1000 Series): 640 × 480 pixel resolution, 100-240 VAC 50 / 60 Hz supply, IP50 (front part, IEC standard). Order code note: 4CH*COM.

Enquire about Autonics KRN1000-0401-0S
Kusam Meco KM 071 4-20 mA DC Process Clamp Meter

Process clamp meter that measures 4-20 mA loop current without breaking the circuit: 0.01 mA – ±40 mA DC, % of span readout, 5 mm jaw, backlight and spotlight.

Enquire about Kusam Meco KM 071
HTC Instruments MT-6 750 °C Industrial Infrared Pyrometer

Non-contact infrared pyrometer, −50 °C to 750 °C (−58 °F to 1382 °F), 12:1 distance-to-spot ratio, laser pointer, colour LCD with backlight, max / min record.

Enquire about HTC Instruments MT-6

Show more products