Environmental & Mechanical

All products in Environmental & Mechanical

523 products Sort by Recommended Brand Model number Newest

• 

  Lutron ORP-213 Pen Type ORP Meter with Separate Electrode

  Pen type ORP meter, -1,000 to 1,000 mV, IP65 water resistant, supplied with the ORP-14 separate electrode for plating baths and waste water checks.

  Enquire about Lutron ORP-213
• 

  Lutron ORP-400 ORP Calibration Solution, 400 mV

  Calibration solution of +400 mV for checking ORP electrodes and meters.

  Enquire about Lutron ORP-400
• 

  Lutron OXEL-03 Dissolved Oxygen Probe Filling Electrolyte

  Filling electrolyte for the dissolved oxygen probes of the DO-5509, DO-5510, DO-5519 and YK-22DOA meters.

  Enquire about Lutron OXEL-03
• 

  Lutron OXHD-04 Spare DO Probe Head with Diaphragm Set

  Spare probe head with diaphragm for the dissolved oxygen probes of the DO-5509, DO-5510 and YK series meters.

  Enquire about Lutron OXHD-04
• 

  Lutron OXPB-09N Dissolved Oxygen Probe for DO-5509

  Replacement dissolved oxygen probe for the DO-5509 meter, with a 9-pin DIN plug and 4 m cable.

  Enquire about Lutron OXPB-09N
• 

  Lutron OXPB-11 Dissolved Oxygen Probe, 4-pin DIN

  Replacement dissolved oxygen probe with a 4-pin DIN plug and 4 m cable for the DO-5510, DO-5519, DO-5512SD, PDO-520 and YK-22DOA meters.

  Enquire about Lutron OXPB-11
• 

  Lutron OXPB-22 Dissolved Oxygen Probe for YK-22DO

  Standard dissolved oxygen probe for the YK-22DO meter, with a 4 m cable.

  Enquire about Lutron OXPB-22
• 

  Lutron PAM-9212SD Pitot Tube Anemometer and Manometer, SD Logger

  Pitot tube anemometer for high air velocities from 4.1 to 100.0 m/s, doubling as a ±200 mbar differential manometer with 10 pressure units and SD card logging.

  Enquire about Lutron PAM-9212SD
• 

  Lutron PCD-431 Pen Type Conductivity / TDS Meter

  All-in-one pen conductivity meter with 2,000 µS and 20.00 mS ranges or TDS, carbon rod electrode and built-in temperature compensation.

  Enquire about Lutron PCD-431
• 

  Lutron PCD-432 Pen Type Conductivity / TDS Meter, Separate Electrode

  Pen conductivity meter with a separate carbon rod electrode, 2,000 µS and 20.00 mS ranges or TDS, and automatic temperature compensation.

  Enquire about Lutron PCD-432
• 

  Lutron PCD-433 Pen Type Conductivity / TDS / Salt Meter, IP67

  Waterproof IP67 pen meter for conductivity (2 µS to 20 mS), TDS and salt (0 to 12 %) with auto range, ATC and data hold.

  Enquire about Lutron PCD-433
• 

  Lutron PCO-350 Pen Type Carbon Monoxide (CO) Meter

  Pen type CO meter with an electrochemical sensor reading 0 to 1,000 ppm, plus temperature, with a CO alarm and data hold.

  Enquire about Lutron PCO-350
• 

  Lutron PDO-519 Pen Type Dissolved Oxygen Meter, IP67

  All-in-one pen dissolved oxygen meter for 0 to 20.0 mg/L with polarographic probe, ATC, max/min recall and IP67 protection.

  Enquire about Lutron PDO-519
• 

  Lutron PDO-520 Pen Type Dissolved Oxygen Meter with Separate Probe

  Pen dissolved oxygen meter with a separate polarographic probe on a 4 m cable, auto calibration, ATC and IP65 protection.

  Enquire about Lutron PDO-520
• 

  Lutron PDT-2250 RPM Controller / Monitor

  Panel tachometer and controller for 10 to 99,999 RPM, m/min or ft/min, with control and alarm relays and adjustable pulses per round.

  Enquire about Lutron PDT-2250
• 

  Lutron PE-03 pH Electrode, Combination Type, BNC

  Combination pH electrode for pH 1 to 13, 12.3 mm diameter and 160 mm long, for Lutron pH meters with a BNC input.

  Enquire about Lutron PE-03
• 

  Lutron PE-03K7 pH Electrode and ATC Temperature Probe Kit

  Kit of a pH electrode (pH 1 to 13) and an ATC temperature probe for the PH-207, PH-208, PH-221, PH-230SD and multi-parameter water meters.

  Enquire about Lutron PE-03K7
• 

  Lutron PE-06HDA Spear Tip pH Electrode for Meat and Cheese

  Spear tip pH electrode with a durable glass spear in a rugged epoxy body, for piercing samples such as meat, sausage and cheese; pH 1 to 13.

  Enquire about Lutron PE-06HDA
• 

  Lutron PE-11 pH Electrode, Slim 10 mm

  Slim combination pH electrode, 10 mm diameter and 130 mm long, measuring pH 1 to 13 (typically 0 to 14).

  Enquire about Lutron PE-11
• 

  Lutron PE-12 pH Electrode for Pen pH Meters PH-222 and PH-223

  Replacement combination electrode with built-in temperature sensor for the PH-222 and PH-223 pen pH meters, pH 1 to 13, 5 to 60 °C.

  Enquire about Lutron PE-12
• 

  Lutron PE-21 Industrial In-line pH Electrode

  Heavy duty in-line pH electrode for continuous monitoring in plants and labs: pH 0 to 14, up to 95 °C, 3/4" NPT thread and 5 m cable.

  Enquire about Lutron PE-21
• 

  Lutron PH-04 pH 4.00 Buffer Solution

  Standard pH 4.00 buffer solution for calibrating pH meters and electrodes.

  Enquire about Lutron PH-04
• 

  Lutron PH-04A pH 4.00 Buffer Solution for Pen pH Meters

  Standard pH 4.00 buffer solution packed for the PH-222 and PH-223 pen pH meters.

  Enquire about Lutron PH-04A
• 

  Lutron PH-07 pH 7.00 Buffer Solution

  Standard pH 7.00 buffer solution for calibrating pH meters and electrodes.

  Enquire about Lutron PH-07

Show more products